background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Sander, which is designed only for DIY 
use.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. This guarantee does not effect your 
statutory rights.

SPECIFICATIONS

Model Number

CDS1V

Rated Voltage

230V~50Hz

Power Input

280W

Duty cycle classification

S1

Insulation class 

II

Speed Range

3000 - 10000 orbits/min

Sound Power Level LWA

87 dB(A), Uncertainty Factor (K) 3 dB(A) 

Weight

1.5 kg

Vibration

7.1 m/s

2

 Uncertainty Factor (K) 1.5

Dimensions (L x W x H)

350 mm x 90 mm x 125 mm

Sanding Pad size

90 x 90 x 90 mm D-shape

Summary of Contents for 6462021













Reviews: