20
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE
CHANGING THE SAW BLADE
Install an appropriate saw blade. Do not use excessively worn blades. The
maximum speed of the mitre saw must not exceed that of the saw blade.
1. With the saw head in the raised
position, Loosen the cover screw
shown.
2. Move the blade guard release
then rotate the blade guard back
by hand.
3. While holding the blade guard
back, slide the cover up to
expose the spindle bolt.
4. Insert the Hex key supplied into
the spindle bolt.
WARNING: MAKE SURE THAT THE SAW IS SWITCHED OFF AND UNPLUGGED
FROM THE MAINS SUPPLY BEFORE FITTING OR REMOVING THE BLADE.
WARNING: THE BLADE MUST BE RATED TO AT LEAST 6000 RPM.
Summary of Contents for 6461518
Page 28: ......
