15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
PLACEMENT/MOUNTING
The charger is designed for indoor use only. The position selected for the
charging of the battery must be cool, dry, clean and well ventilated, away
from flammable goods and ignition sources.
NOTE:
When utilised in caravans, motorhomes, 4WD’s or similar, the charger
should be placed or mounted in a well ventilated location and
protected from rain, water or moisture at all times.
Connection to the mains supply must be in accordance with national wiring
rules and regulations.
To minimise TV/Radio interference, position the charger well away from any TV,
radio, antenna and antenna cables.
CHARGING INSTRUCTIONS
BATTERY MANUFACTURER RECOMMENDATIONS
Before using the battery charger, study the battery manufacturers
recommendations, rates of charge and any particular conditions to the
battery being charged.
CHECK THE ELECTROLYTE LEVEL
Prior to charging the battery, remove the vent caps and check the electrolyte
level.
NOTE:
For batteries without cell caps, follow the battery manufacturers
maintenance and charging instructions.
CONNECTION
a. Connection with Battery out of the Vehicle
Connect the
POSITIVE (RED
) lead/battery
clamp from the charger to the
POSITIVE
battery post. Connect the
NEGATIVE (BLACK)
lead/battery clamp from the charger to the
NEGATIVE
battery post.
NOTE:
The
POSITIVE
terminal of a battery is
defined by the colour
RED
and may
be presented by
POS
,
P
or (
+
). The
NEGITIVE
terminal of a battery is
defined by the colour
BLACK
and may
be represented by
NEG
,
N
or (
-
).
Summary of Contents for 6267035
Page 24: ......
