Clarke 6240030 Operating & Maintenance Instructions Download Page 4

4

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

18. Always store the jump-starter out of reach of children.

19. Always wear safety glasses when working with lead acid batteries.

20. If splashed by battery acid, immediately flush the area of the splash with 

clean water. If a burning sensation is felt or any blistering occurs, seek 
medical help.

21. If acid comes into contact with the eyes, flush the eyes with clean water 

continuously and seek medical help.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the 
obligation to deal with the WEEE in accordance with the WEEE 
regulations in relation to the treatment, recycling & recovery and 
environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general 
household waste. It must be disposed of according to the laws governing 
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal 
facility.

ELECTRICAL SYMBOLS DISPLAYED

The meanings of the safety markings and symbols which may be displayed on 
this product are shown below.

Class II appliance without an earth connection

Always read instructions before use

 Electrical hazard due to exposed live terminals

Chemical Hazard from battery acid

WARNING: ALL LEAD ACID BATTERIES GENERATE HYDROGEN GAS 
DURING NORMAL OPERATION. THIS PROCESS INCREASES DURING A 
PERIOD OF RAPID DISCHARGE, SUCH AS WHEN USING FOR JUMP -
STARTING.

WARNING: HYDROGEN GAS AND BATTERY ACID (SULPHURIC ACID) CAN 
BE: EXPLOSIVE, CORROSIVE TO SKIN, EYES AND HAIR, DAMAGING TO 
CLOTHING AND METALS, FLAMMABLE, POISONOUS TO BREATHE

Summary of Contents for 6240030

















Reviews: