Specifications
2
Model No. .......................................................... PS1
Container Capacity ......................................... 1000cc
Nozzle Size ......................................................... 1.2mm
Working Pressure ............................................... 0.5 to 2.5bar
Max. Working Pressure ..................................... 2.5bar
Air Consumption ............................................... Min. - 70Lpm: Max - 150 Lpm
Spraying ............................................................. Round to Fan
Spray Width at 200mm from surface .............. Min. - 45mm: Max - 230mm
Body material .................................................... Forged Al, Ni Plated
Dimensions ........................................................ 165x250mm
Max. Noise Level at 0.5M behind .................. 76 dB(A)
Max. Noise Level at 0.5M beside .................. 79 dB(A)
Weight ................................................................ 0.525kg
Part No. .............................................................. 5080815
For Spare Parts and Service, please contact your nearest dealer, or Clarke
International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS: [email protected]
SERVICE: [email protected]
Parts and Servicing
Please be aware that certain parts of this spray gun will wear, requiring replacement
and that these parts are not covered by your guarantee.
These parts include the atomising valve, spray nozzle, piston and spring. The wear
on these parts depends on the abrasiveness of the materials being sprayed. More
abrasive materials such as latex paint (emulsions) will cause these parts to wear
much faster. You would normally expect to replace an atomiser valve after spraying
between 25-45 litres of latex.
Replacement valves are available from your dealer or the Clarke International
Parts Department.
