Clarke 4500365 Operation & Maintenance Instructions Manual Download Page 2

2

Parts & Service: 020 8988 7400

INTRODUCTION

Thank you for purchasing this CLARKE Digital Caliper.

Please read this instruction leaflet thoroughly and 
follow the instructions carefully, to ensure that the 
instrument will give you long and satisfactory service.

Please keep these instructions in a safe place for 
future reference.

GUARANTEE

This CLARKE product is guaranteed against faulty 
manufacture for a period of 12 months from the date 
of purchase. Please keep your receipt as proof of 
purchase.

This guarantee is invalid if the product is found to 
have been abused or tampered with in any way, or 
not used for the purpose for which is was intended.

Faulty goods should be returned to their place of 
purchase, no product can be returned to us without 
prior permission.

This guarantee does not effect your statutory rights.

SAFETY PRECAUTIONS

Keep the body of the caliper clean at all 
times, do not use alcohol or other corrosive 
chemicals as they could damage the internal 
electronics.

Prevent accidental damage to the caliper 
by storing in its case when not in use.

DO NOT immerse the caliper in liquid or allow 
liquid to enter the slide.

Summary of Contents for 4500365














Reviews: