14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
If small adjustments are needed,
two people should pull the roof
tarp (18) from the same side so
that it does not twist.
Loosen the bottom cross r (6)
from the frame. Slide the cross
bottom rails (6) through the tube
sleeves on one side of the roof
tarp. (18).
Re-assemble the clamps (12, 13)
and fittings (15,16,17) and
tighten slightly (fig 22).
Ensure the cross rails (6) are
horizontal.
Repeat the same procedure for
the opposite side of the roof tarp
(18).
Check and make sure all the
bottom cross rails (6) are level
and horizontal, and are the
same height from the ground.
Tighten all the nuts and bolts at
this stage.
Fasten the black straps at the four corners with the ratchet tie down (14).
The shed is now ready for use.
Check and tighten the bottom cross rails (6) and ratchets (14) monthly to ensure
that the roof tarp (18) is tight and secure.
DISASSEMBLY
When disassembling the shelter,
depress the spring-loaded bar to
disengage the ratchet and open the
ratchet handle completely to allow
the webbing strap to pull through.
PLEASE RE-READ ALL WARNINGS
CONTAINED ON PAGES 2/3 OF THESE
INSTRUCTIONS. SAVE THESE
INSTRUCTIONS FOR FUTURE USE.
To dismantle, execute all instructions
in reverse order.
Summary of Contents for 3503582
Page 16: ......
