14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6. Slide the bottom cross rails through the fabric pockets at each leg and re-
attach with clamps at each leg. Repeat this on the other side. Push down
on the cover rails to tighten the cover before tightening all bolts.
7. When the cover rails are all secured, proceed to the four corners and
tighten the end covers to the end frames using the ratchet action.
NOTE:
Note: Over-tightening can cause damage to straps and/or the
anchor point. Do not over-tighten!
NOTE:
Check periodically (two to three times in the first week) and
tighten ratchet tie-downs and all hardware as needed. Monthly
inspection is recommended throughout usage.
WARNING: IF POSITIONING THE SHED IN A WINDY LOCATION ALWAYS
ENSURE THE FRONT DOOR IS KEPT FULLY CLOSED TO PREVENT WIND
LIFTING THE SHED FROM INSIDE.
Summary of Contents for 3503574
Page 16: ......
