Clarke 3500207 Assembly & Operation Instructions Download Page 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Scaffold Ladder.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

SPECIFICATIONS

Model Number

SL2

Part Number

3500207

Height

Straight Ladder

1910-2725 mm

A Frame

1605 mm

Working Platform

1000 mm

Maximum Load

150 kg

Product Weight

15.15 kg

Summary of Contents for 3500207













Reviews: