13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4. If replacement is necessary,
renew the brush and replace the
cap.
MAINTENANCE
• ALWAYS inspect the sander before use and ensure it is in working
condition.
• Ensure all air vents are clear. (Use vacuum cleaner to clean the
machine where possible).
• Check the power cable to ensure it is sound and free from cracks,
bare wires etc. Avoid using solvents when cleaning plastic parts,
(most plastics are susceptible to damage from the various types of
commercial solvents).
TROUBLESHOOTING
PROBLEM
CAUSE
REMEDY
Sander is
overheating.
The machine is blocked
with dust.
Clean the ventilation holes.
Wipe the exterior with a dry cloth.
Excessive
Sparking.
Worn brushes.
See page 12, replacing carbon
brushes.
Sander does
not operate
when
switched on.
Check to ensure the fuse
in the plug is sound.
If the fuse is sound or blows
repeatedly, consult your CLARKE
dealer.
Dust is not
extracted.
The dust bag is full or the
dust extractor flue is
blocked.
Remove and empty the bag, also
clear any blockage.
Summary of Contents for 3400404
Page 17: ......
