Clarke 3400035, Operating & Maintenance Instructions, Page: 8 / 20

8
Grass Box
1. Position the two grass box
halves together and press
each location point (Fig.6)
into position without fully
connecting the clips.
When the location points
are matched correctly
firmly press the grass box together until all clips are securely connected. (Fig.6A)
2. To attach the grass box to your lawn mower, lift the safety flap (Fig.7) and make
sure the discharge chute is clean and free from debris.
3. Locate fully assembled
grass box onto 2 location
points at the rear of the
deck (Fig.7).
4. Locate safety flap onto the
top of the grass box. Ensure
the grass box is securely
located (Fig.7A).
Removal is the reverse procedure.
NOTE
1. Ensure no gap remains between the safety flap and the grass box.
2. Where grass collection is not required you can use the lawn mower without
the grass box, but you MUST ENSURE THE SAFETY FLAP IS FULLY CLOSED.
Assembly is now complete, but before using the lawn
mower, certain important checks MUST be made which are
described in the following pages.