3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
GENERAL SAFETY RULES
WORK ENVIRONMENT
1. Keep the work area clean and tidy.
2. Dress appropriately -
DO NOT
wear loose clothing or jewellery. Tie long hair
out of the way.
3. Keep children and visitors away - Do not let children handle the drill.
4.
DO NOT
operate the drill where there are flammable liquids or gases.
5. Keep the air supply hose away from heat, oil and sharp edges.
6.
DO NOT
fit the drill to any stand or clamping device that may damage it.
USE
1. Stay alert and use common sense -
DO NOT
operate the drill when you are
tired or under the influence of alcohol, drugs or medication.
2.
ALWAYS
wear eye protectors when using the drill - eye protectors must
provide protection from flying particles from the front and the side.
3.
ALWAYS
wear ear protectors when using the drill.
4.
DO NOT
overreach - keep proper footing and balance at all times.
5.
NEVER
use any type of bottled gas as a source of power for the drill.
6.
DO NOT
connect the air supply hose with your finger on the trigger of the
drill.
7.
DO NOT
exceed the maximum pressure for the drill 90 psi / 6.2 bar.
8. Check hoses for leaks or worn condition before use and ensure that all
connections are secure.
9.
DO NOT
use the drill for any other purpose than that described in this
manual.
10.
DO NOT
carry out any alterations or modifications to the drill.
11.
ALWAYS
disconnect from the air supply when:
• Performing any maintenance
• The drill is not in use.
CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN
PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.
Summary of Contents for 3110881
Page 16: ......
