SAFETY PRECAUTIONS
IMPORTANT
Failure to follow these precautions could result in personal injury, and/or
damage to property.
1.
When operating this tool,
ALWAYS
wear:
a.
approved impact resistant SAFETY GOGGLES. (Eye glasses are NOT safety
glasses)
b.
EAR DEFENDERS
c.
a good pair of INDUSTRIAL GLOVES
2.
ALWAYS
disconnect the tool from the air supply when not in use, and before
carrying out any maintenance
3.
ALWAYS
keep a safe distance between yourself and others when using the
tool.
4.
ALWAYS
Maintain the tool with care. Keep it clean for best/safest performance.
5.
NEVER
wear ill fitting clothing, remove watches and rings.
6.
NEVER
over-reach. Keep your proper footing and balance at all times.
7.
NEVER
force or misuse the tool. It will do a better and safer job at the rate for
which it was designed.
8.
NEVER
abuse hoses or connectors. NEVER carry a tool by the hose, or yank it
to disconnect from the air supply. Keep hoses away from heat, oil and sharp
edges. Check hoses for leaks or worn condition before use, and ensure that
all connections are secure.
9.
NEVER
use with an air supply greater than 8bar (110 PSI), at the tool.
10.
NEVER
modify the tool in any way.
11.
NEVER
remove any labels. Damaged labels should be replaced.
12.
NEVER
point the tool at anyone.
13.
NEVER
carry the tool with your finger on the trigger.
14.
NEVER
use any other type of gas to operate this tool. Use compressed air ONLY.
15.
NEVER
load the tool with Staples BEFORE connecting to an air supply.
16.
NEVER
load the tool with the trigger depressed
17.
NEVER
use this tool if any part is damaged. Have it inspected and repaired
by a competent technician
18.
NEVER
modify this tool in any way. Use it ONLY for the purpose for which it is
designed.
19,
NEVER
fire tool at an angle. it must be perpendicular to the work surface.
20.
NEVER
drive in Staples at the edge of a work surface, as the edge could fail
and fly off, endangering yourself or others in the vicinity.
4
