5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use.
Many
accidents are caused by poorly maintained power tools.
5.
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
6.
Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained
STAPLER SPECIFIC SAFETY WARNINGS
1. Always assume that the machine contains staples. Careless handling of the
stapler can result in unexpected firing of nails and personal injury.
2. Do not point the stapler towards yourself or anyone nearby. Unexpected
triggering will discharge the staples causing an injury.
3. Do not actuate the stapler unless it is placed firmly against the workpiece.
If the tool is not in contact with the workpiece, the fastener may be
deflected away from your target.
4. Disconnect the tool from the airline when the staples jam in the tool. While
removing a jammed staple, the stapler may be accidentally activated if it
is connected.
5. Do not use this stapler for fastening electrical cables. It is not designed for
electric cable installation and may damage the insulation of electric
cables thereby causing electric shock or fire hazards.
6. Never drive in staples at the edge of a work surface, as the edge could fail
and fly off, endangering yourself or others in the vicinity.
7. Never fire tool at an angle. it must be perpendicular to the work surface
TRANSPORTATION
1. Never carry the tool by the air supply hose.
2. Never carry the tool with your finger on the trigger.
STORAGE
1. When not in use the tool must be disconnected from the air supply and
stored in a dry place out of the reach of children.
2. Avoid storing the tool in environments where the temperature is below 0
o
Summary of Contents for 3110375
Page 16: ......
