6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
CAUTION: TO PREVENT INJURY, GET ASSISTANCE WHEN LIFTING OR
MOVING THIS COMPRESSOR.
Before connecting your compressor to the power supply, check the following:-
• Set the ON/OFF switch to the
OFF position (pushed down).
• Make sure that the compressor
is on level ground.
• Make sure that the supply
voltage matches the voltage
shown on the data label.
CHECKING THE OIL LEVEL
1. Ensure the oil level is filled up to
the mark on the sightglass.
2. If low, top up after unscrewing the
filler plug.
• Only use ISO100 (SAE30)
compressor oil, available from
your CLARKE dealer Part No.
3050796.
• Take care not to overfill.
Summary of Contents for 2245317
Page 20: ......
