background image

-

 

4 -

INTRODUCTION

Thank you for purchasing this Clarke Air portable
compressor. The unit is powered by a 5HP Honda engine, a
manual for which, is provided separately. Please refer to
that manual for all matters relating to the engine, ...starting
and stopping procedures, maintenance etc.

Read these safety instructions before using the equipment.

CONTENTS

Page

GUARANTEE

This product is guaranteed against faults in manufacture for 12 months

from purchase date. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product has been abused or tampered

with in any way, or not used for the purpose for which it is intended.

The reason for return must be clearly stated.

This guarantee does not affect your statutory rights.

Introduction .................................................................................................................. 4

Guarantee .................................................................................................................... 4

For your Own Safety .................................................................................................... 5

Important General Notes ............................................................................................ 6

General Layout ............................................................................................................ 7

Preparation for Use ...................................................................................................... 8

Starting & Using your Air Compressor ....................................................................... 9

Shutting Down the Compressor ............................................................................... 10

Maintenance .............................................................................................................. 11

Troubleshooting ......................................................................................................... 12

Parts and Service Contacts ...................................................................................... 14

Parts Lists and Diagrams ...................................................................................... 15-17

Declaration of Conformity ........................................................................................ 18

Summary of Contents for 2090901





















Reviews: