Clark HWXE 30, Operator'S Manual

Page: 13 / 88

xi
Safety Standards
IMPORTANT!
You should be familiar with additional operating and maintenance
safety instructions contained in the following publications:
ANSI / ITSDF B56.1: Safety Standard for Low Lift and High Lift Trucks
(Safety Code For Powered Industrial Trucks). Available from: Industrial
Truck Standards Development Foundation, 1750 K Street NW Suite 460,
Washington, DC 20006.
NFPA 505: Fire Safety Standard for Powered Industrial Trucks: Type Desig-
nations, Areas of Use, Maintenance and Operation. Available from: National
Fire Protection Association, Inc., 1 Batterymarch Park, Quincy, MA 02169.
General Industry Standards, OSHA 2206: OSHA Safety and Health Stan-
dards (29 CFR 1910), Subpart N - Materials Handling and Storage, Section
1910.178 Powered Industrial Trucks. Available from: U.S. Government
Publishing Office, 732 North Capitol Street, Washington, DC 20401 or
contact your CLARK dealer.
IMPORTANT!
Your CLARK lift truck has been built to meet all applicable
mandatory requirements of ANSI / ITSDF B56.1 Safety
Standard for Powered Industrial Trucks. Each truck also in-
cludes certain safety devices, such as a horn and overhead
guard, as standard equipment. No additions, omissions, or
modifications should be made to the truck that affect com -
pliance to the above requirements or in any way minimize
the effectiveness of the safety devices.