Clark ESX Series, Operator'S Manual

Page: 86 / 108

6.16
HOURMETER
ALARM
SPEED
REDUCTION
HOUR METER /
ALARMS DISPLAY
BATTERY
CHARGE
TILT RESTRICTION
INDICATOR
718071
Diagnostic Display
Functional Tests
The standard diagnostic display
indicates the operating hours
registered on the truck, a scale of
usable charge left on the battery,
fault codes, speed reduction indica-
tor and a LED that indicates when
the tilt is outside of the restricted
tilt range. The hour meter or fault
codes display when the key switch
is
ON . The hour meter reading is
indicated along with the hour glass
symbol and an alarm is indicated
along with the wrench symbol. If
the truck is operating in a speed
reduction mode, the turtle indicator
will be present.
Your truck has a Diagnostic Display. "88888" should display on the
digital readout for about one second after you turn the key switch to ON.
This indicates that the digital readout is OK. After one second, either
the hour glass symbol or the wrench symbol should come on.
If the hour glass symbol comes on, the digital readout shows the truck
operating hours. If the wrench symbol comes on, an alarm code ap-
pears on the digital readout. The alarm code may indicate an easily
correctable "operator fault" or it may indicate that you need to have
the truck serviced.
The battery state of charge scale is divided into 10 segments indicat-
ing every 10% of battery charge. When the gauge registers 10% (one
LED), the lift, tilt, and auxiliary functions become inoperable and the
truck's travel speed is greatly reduced. At this point the battery will be
80% discharged. Charge or replace the battery immediately.