www.clarksynthesis.com
Diluvio
™
Underwater Speaker
8
Carefully remove the speaker from its box and set aside. Remove the black o-ring from inside the
red gasket and dispose.
NOTE:
The Face Ring Kit, Stainless Steel Screen, Niche and Isolation Transformer are not included and
may be purchased from Clark Synthesis.
Install the mounting gasket around the rubber ring of the sound lens. The gasket’s flat side will
go towards the face ring. The grooved side faces the speaker body. Insure the mounting gasket is
installed evenly and is firmly seated against the entire circumference of the sound lens.
Flat side
Grooved Side
IN-WALL INSTALLATION
1
2
