Clarity U-PAD2, Manual

Page: 26 / 43

U-PAD2 A/D Converter 5 Troubleshooting
5.2 Problems with U-PAD2
▌ Most problems with U-PAD2 driver are generally indicated by following symptoms:
l
U- PAD2 cannot be added to the Setup Control Modules in the System
Configuration dialog.
l
Clarity will issue an error message "Cannot establish communication with
DataApex U-PAD2" when opening the Instrument window.
l
Double- clicking on the device will not invoke the DataApex U- PAD2 Setup
dialog.
l
Clarity will issue an error message "DataApex U- PAD2 (SN:XX) Device not
found" when starting Clarity .
l
The Data Acquisition icon in the Instrument window is not active (this problem
may also have another cause). For more details see the chapter Data
Acquisition - non-functional on pg 33 .
Solution:
When one of these problems occur, first check if the U-PAD2 is correctly plugged in
the USB port. If it is, check the U-PAD2 driver (see the chapter "How to check
the U- PAD2 driver" on pg 23 .) and then proceed according to the suggested
solutions.
- 22 -