U-PAD2 A/D Converter
4 Using the U-PAD2
4 Using the U-PAD2
There are generally two places for setting the parameters of the
U-PAD2
A/D Converter
in
Clarity
:
The
dialog for setting the parameters that are
set with respect to the type of connected signal.
The
tab for setting the parameters related to
the type of analysis.
4.1 DataApex U-PAD2 Setup
The
DataApex U-PAD2 Setup
dialog sets the parameters of the
U-PAD2
converter and since it depends on the type of connected signal, it is not
going to be changed often.
Fig 12: DataApex U-PAD2 Setup
Device
Shows the serial number of selected
U-PAD2
. If more than one
U–PAD2
is attached to the PC, this field serves for defining which
U–PAD2
will be
added and configured first or, in case of removing one
U-PAD2
from the
configuration, for specifying which one is still connected.
Number of Channels
Indicates the number of data acquisition channels.
Channel 1 (2)
For each channel of the
U-PAD2 A/D Converter
the name of the signal
can be edited in the
Name
①
field and the
Set Units...
②
button can be
used to change other signal parameters. Effects of these changes can be
seen in other fields of the respective
Channel 1 (2) section
.
- 13 -
