1
CSP SMB-200
Issue 2
(540) 427-3505
SMB-200
200 WATT 2-CHANNEL POWER AMPLIFIER
INTRODUCTION
These instructions contain the specifications and
information necessary to install, operate, and maintain
the SMB-200, 200 Watt 2-Channel power amplifier
manufactured by Clarity, 1111 Industry Avenue,
Roanoke, VA 24013.
"WARNING: To reduce the risk of fire or
electric shock, do not expose this appliance
to rain or moisture."
"WARNING: Shock Hazard - Do Not Open."
"AVIS: Risque de Choc Electrique ne pas
Ouvrir."
SPECIFICATIONS
Purpose
The SMB-200 2-Channel Power Amplifier provides
up to 100 watts of audio power per channel in the
2-channel mode and 200 watts of audio power in
bridge mode for voice paging or background music
systems.
Applications
•
Clarity Paging and Sound Reinforcement
Systems
•
Clarity Stand Alone Background Music Systems
Refer to Figure 1 for a block diagram of a typical
installation.
Features
- 100 watts per channel
- Shelf or rack mount (optional rack kit SMA-RMK)
- Volume control for each channel
- ON/OFF switch
- Circuit breaker protection
- Overload limiting circuit protection
- Phono jacks for input connections
- Screw terminals for output connections
- Power "ON" indicator per channel
- Clipping indicator per channel
- 2 ohm output 2-channel, 4 ohm output bridge
Dimensions and Weight
•
17.1" W x 14.75" D x 3.9" H
(43.43 cm W x 37.38 cm D x 9.9 cm H)
•
24 lbs (10.8 kg)
Accessories
•
SMB-101 Wall or shelf mount 100 watt
2-channel transformer unit (25,70,100 volt)
•
SMB-102 Wall or shelf mount 200 watt
1-channel transformer unit (70,100 volt)
•
SMB-201 Rack mount 100 watt 2-channel
transformer unit (25,70,100 volt)
•
SMB-202 Rack mount 200 watt 1-channel
transformer unit (70,100 volt)
•
SMA-RMK Rack mount kit
Nominal Specifications
Wattage Output
100 Watts RMS per channel
200 Watts RMS Bridge
Type Outputs
2- channel mode, 2 Ohms
Bridge mode, 4 Ohms
Frequency Response
50-25 kHz + 2 dBm
Distortion
<.5% @ 1 kHz Rated Output
S/N
<80 dBm
Input Impedance
10 K Ohms
Sensitivity
500 mVRMS
Contour roll off
300 Hz 6dBm per octave
Mounting
Wall or Rack
Power Requirements
Voltage 120
Vac
Current
5.0 Amps
947443
