manualshive.com logo in svg

Clarity RetCam Shuttle, User Manual, Page: 93 / 177

Share
Download
Clarity RetCam Shuttle User Manual Download Page 93

            

92

Chapter 5 

Using the RetCam System

RetCam 3 and RetCam Shuttle User Manual

PN 18-000393 Rev. A

Figure 76

Select Options for Image Capture

Changing Right Eye (OD) / Left Eye (OS)

To image the other eye in the same session, expand the 

Eye 

menu and select the other 

eye (

Right Eye (OD)

 or 

Left Eye (OS)

). The 

Eye

 selection is saved with the image. A still 

image captured from video inherits the image option selected at the start of video 
recording.

NOTE

When using this option, be careful to select the correct eye before you 
capture the image.

NOTE

Still images and video can be selected for deletion only during the imaging 
session. When you exit the session, all images and videos not marked for 
deletion are automatically saved. 

By default, videos are marked for deletion when you exit an imaging session. 
For instructions on saving videos, see 

Saving a Video on page 90

. 

Changing Image Type

Expand the 

Type

 menu to label images as 

Retina, Anterior,

 or 

Unspecified

 during an 

imaging session. All selections record the images in color. The Image type label is saved 
with the image.

Changing Lens

You can label a lens piece during imaging. Expand the 

Lens

 menu to select 

1300

 

(Premature Infant), 

1200

 (Standard Baby), 

800

 (High Contrast), 

300

 (High Mag), 

Other

, or 

Unspecified

. The lens piece label is saved with the image.

Adding Exam Notes

You can add notes during an exam or after the exam is completed. After you save notes, 
you cannot edit them.

Summary of Contents for RetCam Shuttle


















































































































































































Reviews:

No comments