REGULATORY COMPLIANCE
Part 68 of FCC Rules Information
a) This equipment complies with Part 68 of the FCC rules and
the requirements adopted by the ACTA. On the bottom of this
equipment is a label that contains, among other information,
a product identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the telephone
company.
b) A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply with
the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug,
RJ11C USOC, is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant.
See installation instructions for details.
c) The REN is used to determine the number of devices that
may be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response
to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is part of
the product identifier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal
point (e.g., 03 is a REN of 0.3). For earlier products, the REN is
separately shown on the label.
d) If this telephone equipment causes harm to the telephone
network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if
advance notice isn’t practical, the telephone company will notify
the customer as soon as possible. Also, you will be advised of
your right to file a complaint with the FCC if you believe it is
necessary.
e) The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make
necessary modifications to maintain uninterrupted service.
f) If trouble is experienced with this telephone equipment, for
repair or warranty information, please contact Clarity, 1-800-552-
3368. If the equipment is causing harm to the telephone network,
the telephone company may request that you disconnect the
equipment until the problem is resolved.
g) This telephone equipment is not intended to be repaired and
it contains no repairable parts. Opening the equipment or any
attempt to perform repairs will void the warranty. For service or
repairs, call 1-800-552-3368.
h) Connection to party line service is subject to state tariffs.
Contact the state public utility commission, public service
commission or corporation commission for information.
Part 68 of FCC Rules Information
i) If your home has specially wired alarm equipment connected
to the telephone line, ensure the installation of this telephone
equipment does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your
telephone company or a qualified installer.
j) This telephone equipment is hearing aid compatible.
Customer-Owned Coin/Credit Card Phones:
To comply with state tariffs, the telephone company must be given
notification prior to connection. In some states, the state public
utility commission, public service commission or corporation
commission must give prior approval of connection.
Part 15 of FCC Rules Information
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Your equipment has been tested and found to comply with the limits
of a Class B digital device, pursuant to Part 15 of FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation; if this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, you
are encouraged to try to correct the interference by one of the
following measures:
1. Where it can be done safely, reorient the receiving television or
radio antenna.
2. To the extent possible, relocate the television, radio or other
receiver with respect to the telephone equipment. (This increases
the separation between the telephone equipment and the receiver.)
3. Connect the telephone equipment into an outlet on a circuit
different from that to which the television, radio, or other receiver is
connected.
4. Consult the dealer or an experienced Radio/TV Technician for
help.
CAUTION:
Changes or modifications not expressly approved by
the manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Industry Canada Technical Specifications
This product meets the applicable Industry Canada
technical specifications.
Before installing this equipment, users should ensure that it
is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed
using an acceptable method of connection. In some cases, the
company’s inside wiring associated with a single line individual
service may be extended by means of a certified connector
assembly (telephone extension cord). The customer should be
aware that compliance with the above conditions may not prevent
degradation of service in some situations. Repairs to certified
equipment should be made by an authorized Canadian maintenance
facility designated by the supplier.
Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company
cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and
internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural
areas.
CAUTION:
Users should not attempt to make such connections
themselves, but should contact the appropriate electrical inspection
authority, or electrician, as appropriate.
The Ringer Equivalence Number is an indication of the maximum
number of terminals allowed to be connected to a telephone
interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all the devices does not
exceed five.
This Class B digital apparatus complies with Canadian ICES-
003.
(The term “IC:” before the certification/registration number only
signifies that the Industry Canada technical specifications were
met.)
To obtain warranty service, please prepay shipment and return
the unit to the appropriate facility listed below.
Clarity Service Center,
Plantronics Service Center
4289 Bonny Oaks Drive, Suite 106, 8112 Trans Canada Highway
Chattanooga, Tennessee 37406
Ville Saint-Laurent, Quebec
H4S 1M5
Tel. (423) 629-3500 or
Tel: (800) 540-8363
(800) 552-3368
or (514) 956-8363
Fax: (423) 622-7646
Fax: (514) 956-1825
or (800) 325-8871
Please use the original container, or pack the unit(s) in a sturdy
carton with sufficient packing material to prevent damage. Include
the following information:
A proof-of-purchase indicating model number and date of
purchase;
Bill-to address;
Ship-to address;
Number and description of units shipped;
Name and telephone number of person to call, should contact
be necessary;
Reason for return and description of the problem.
Damage occurring during shipment is deemed the responsibility
of the carrier, and claims should be made directly with the carrier.
The following warranty and service information applies only
to products purchased and used in the U.S. and Canada. For
warranty information in other countries, please contact your local
retailer or distributor.
Limited Warranty
: Clarity, a division of Plantronics, Inc.
(“Clarity”) warrants to the original consumer purchaser that,
except for limitations and exclusions set forth below, this
product shall be free from defects in materials and workmanship
for a period of one (1) year from the date of original purchase
(“Warranty Period”). The obligation of Clarity under this
warranty shall be at Clarity’s option, without charge, of any part
or unit that proves to be defective in material or workmanship
during the Warranty Period.
Exclusions from Warranty
: This warranty applies only to
defects in factory materials and factory workmanship. Any
condition caused by accident, abuse, misuse or improper
operation, violation of instructions furnished by Clarity,
destruction or alteration, improper electrical voltages or currents,
or repair or maintenance attempted by anyone other than Clarity
or an authorized service center, is not a defect covered by this
warranty. Telephone companies manufacture different types of
equipment and Clarity does not warrant that its equipment is
compatible with the equipment of a particular phone company.
Implied Warranties
: Under state law, you may be entitled
to the benefit of certain implied warranties. These implied
warranties will continue in force only during the warranty
period. Some states do allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
I
ncidental or Consequential Damages:
Neither Clarity nor
your retailer dealer or selling distributors has nay responsibility
for any incidental or consequential damages including without
limitation, commercial loss or profit, or for any incidental expenses,
expenses, loss of time, or inconvenience. Some states do not allow
exclusion or limitation of incidental or consequential damage, so
the above limitation or exclusion may not apply to you.
Other Legal Rights
: This warranty gives you specific legal rights
and you may also have other rights which vary from state to state.
WARRANTY SERVICE INFORMATION
REGULATORY COMPLIANCE
REGULATORY COMPLIANCE
PARTY RESPONSIBLE FOR
REGULATORY COMPLIANCE
Clarity, A Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
Phone: 1-800-426-3738
WARRANTY SERVICE INFORMATION
