Clarity CDAB7-AUTO, Instruction Manual

Page: 7 / 11

6
2. Press the UP or DOWN buttons to change the DAB service.
3. If the device fails to tune to the desired station within this time, the display will show
the following.
NOTE: If after selecting a station the display shows “ No Signal ”, it may be necessary
to relocate to obtain a better signal.
Finding a new FM transmitter frequency
If the current FM frequency selected has interference then let the unit re-scan for
another frequency by pressing and holding the
MENU button.
DAB OPERATION DAB OPERATION
Finding New Stations – DAB
1. Press the SCAN button and hold it for 3 seconds. This initiates a Full Scan, the
device will display the following:
2. Press the SCAN button. This initiates a Quick Scan, the device will display the
following:
3. During scanning, the device will initially display the following.
4. As new stations are found, the number of stations detected will be updated on the
display
 






 

 



