background image

SWITCHING TO CD MODE 

If there is no CD disc inserted in the driver:

 

Gently insert the disc with the printed side 
uppermost into the CD compartment until 
you feel some resistance. The disc is 
drawn into the driver automatically. Disc 
playback begins. 
If a CD disc is already inserted in the driver:

 

Keep pressing 

MOD 

button (10) shortly 

until the CD mode display appears. 

 

SELECTING TRACKS 

Press

 button (4) or

 

 button (4) to 

move to the previous track or the following 
track. Track number shows on display.   
Hold 

 button (4) or

 

 button (4) to 

fast reverse or fast forward. Disc play starts 
from when you release the button.   

PAUSING PLAYING 

Press

 PAU

 button (20) to pause the player. 

Press it again to resume play. 

PREVIEWING TRACKS 

Press 

SCN

 button (19) to play first several   

seconds of each track on the current disc. 
Press again to stop intro and listen to track.

     

When playing CD disc, press and hold 

SCN

 button (19) to play first

   

REPEATING TRACKS 

Press 

RPT

 button (18) to continuously 

repeat the same track. Press it again to 
stop repeat. 
When playing CD disc, press and hold 

RPT

 button (18) to repeat all tracks in   

the current directory. Press it again to exit 
this mode. 

 

PLAYING TRACKS IN RANDOM

 

Press 

SHF

 button (16) to play all tracks on 

CD in random order. Press again to cancel 
the function. 
When playing CD disc, press and hold 

SHF

 button (16) to play all tracks in 

the current directory in random order. 
Press it again to exit this mode. 

EJECTING A DISC 

Press 

 button (7) to stop CD playing 

and eject the disc from the disc slot (3). 

CD Operations

11

DISPLAY INFORMATION 

Press 

DISP

 button (5) to show the 

following information, such as the clock 
source information      

Disc Notes

A. Notes on discs: 

1.  Attempting to use non-standard shape 

discs (e.g. square, start, heart) may 
damage the unit. Be sure to use round 
shape CD discs only for this unit. 

2.  Do not stick paper or tape, etc, onto the 

label side or the recording side of any   

discs, as it may cause a malfunction. 

3. Dirt, 

dust, 

scratches and warping discs 

will cause misoperation. 

B. Notes on CD-Rs (recordable 
CDs)/CD-RWs (rewritable CDs): 

1. Be sure to use discs with following 

marks only for the unit to play: 

 
 
 
2. The unit cannot play a CD-R and 

CD-RW that is not finalized. (Please 
refer to the manual of your 
CD-R/CD-RW recorder or 
CD-R/CD-RW software for more   

information on finalization process). 

been written for more than 5 times. 

ReWritable

seconds 

of each track in the current directory. 
Press it again to exit this mode.

Summary of Contents for CCE3066
















Reviews: