VRX775VD
VRX776VD
- 4 -
9. Turn the unit OFF during disassembly and parts replacement.
Recheck all work before you apply power to the unit.
10. Cautions in checking that the optical pickup lights up.
The laser is focused on the disc reflection surface through the
lens of the optical pickup. When checking that the laser opti-
cal diode lights up, keep your eyes more than 30cms away
from the lens. Prolonged viewing of the laser within 30cms
may damage your eyesight.
11. Cautions in handling the optical pickup
The laser diode of the optical pickup can be damaged by elec-
trostatic charge caused by your clothes and body. Make sure
to avoid electrostatic charges on your clothes or body, or dis-
charge static electricity before handling the optical pickup.
11-1. Laser diode
The laser diode terminals are shorted for transportation in or-
der to prevent electrostatic damage. After replacement, open
the shorted circuit. When removing the pickup from the mecha-
nism, short the terminals by soldering them to prevent this
damage.
11-2. Actuator
The actuator has a powerful magnetic circuit. If a magnetic
material is put close to it. Its characteristics will change. En-
sure that no foreign substances enter through the ventilation
slots in the cover.
11-3. Cleaning the lens
Dust on the optical lens affects performance.
To clean the lens, apply a small amount of isopropyl alcohol to
lens paper and wipe the lens gently.
ERROR DISPLAYS
If an error occurs, one of the following displays is displayed. Take the measures described below to solve the problem.
DVD
Player
CD
Changer
If an error display other than the ones described above appears, press the Reset button. If the problem
persists, turn off the power and consult your store of purchase.
* When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared
.
Displa y
Cause
Measure
ERROR 2
A disc is caught inside the
CD deck and is not ejected.
This is a failure of DVD deck’s mechanism.
ERROR 3
A disc cannot be played
due to scratches, etc.
Replace with a non-scratched, non-warped disc.
ERROR 6
A disc is loaded upside-
down inside the DVD deck
and does not play.
Eject the disc then reload it properly.
PARENTAL
VIOLATION
Parental level error
Set the correct Parental level.
WRONG REGION
Region code error
Eject the disc, and replace correct region code
disc.
DRM
WMA files protected by
DRM are played.
Perform the operation such as skipping a file.
(Scan, repeat and random playback mode may be
canceled.)
NOT SUPPORT
Files not supported by this
unit are played.
ERROR 2
A disc inside the CD
changer is not loaded.
This is a failure of CD changer’s mechanism.
ERROR 3
A disc inside the CD
changer cannot be played
due to scratches, etc.
Replace with a non-scratched, non-warped disc.
ERROR 6
A disc inside the CD
changer cannot be played
because it is loaded
upside-down.
Eject the disc then reload it properly.
