Clarion VRX633R Owner'S Manual & Installation Manual Download Page 29

Page: 29 / 42

VRX633R

English

Owner

’s manual

Setting the TV area

∗

This function is enabled only when the panel is

open.

When you select the TV area (TV reception area),
the TV tuner area setting changes.

1. Press the ADJ button

to switch to the ad-

justment selection display.

2. Operate the JOYSTICK

upward or down-

ward to move the cursor to “TV AREA” and
press the ENT at the center of the JOYSTICK

to display a list of country name.

3. Operate the JOYSTICK

upward or down-

ward to select a desired country. Then press
the ENT at the center of the JOYSTICK

set it.

4. When the setting is finished, operate the JOY-

STICK

rightward or leftward to move the

cursor “MENU”. Then press the ENT at the
center of the JOYSTICK

to return to the

adjustment selection display.

Setting the TV diver

∗

This function is enabled only when the panel is

open.

∗

Normally use the TV diver with the “ON” position.

You can change the reception setting for the TV
antenna connected to the TV tuner.

1. Press the ADJ button

to switch to the ad-

justment selection display.

2. Operate the JOYSTICK

upward or down-

ward to select “TV DIVER”.

3. Operate the JOYSTICK

rightward or left-

ward to select “ON” or “OFF” and press the
ENT at the center of the JOYSTICK

to set

the selected reception setting.

●

ON:

Sets reception emphasizing the visual.

●

OFF:

Sets the diver setting to OFF.

4. Press the ADJ button

to return to the pre-

vious mode.

TV Operations

Adjusting the brightness and tone
of color

Notes:
• This operation is available only when the car is

stopped and the parking brake is applied.

• This function is not available when the display is

stored.

• The HUE setting can be adjusted only when the

NTSC mode is selected.

1. Press the BND button

to switch to the ad-

justment selection display.

2. Operate the JOYSTICK

upward or down-

ward to select the option “MONI ADJ” (by mov-
ing the cursor).

3. Press the ENT at the center of the JOYSTICK

4. Operate the JOYSTICK

rightward or left-

ward to select “BRIGHT”,“COLOR” or “HUE”
(by moving the cursor).

●

“BRIGHT“:

Adjust the brightness of the display.

●

“COLOR“:

Adjusts the color saturation.

●

“HUE“:

Adjusts the tone of color (red is emphasized
or green is emphasized.)

5. Operate the JOYSTICK

upward or down-

ward to adjust a level.

6. When the adjustment is made, operate the

JOYSTICK

rightward or leftward to move

the cursor to “MENU”. Then press the ENT at
the center of the JOYSTICK

to return to

the adjustment selection display.

Summary of Contents for VRX633R











































Search results

Summary of Contents for VRX633R

Reviews:

Related manuals for VRX633R

Brands by name

Popular brands

Clarion VRX633R, Owner'S Manual & Installation Manual

Search results

Summary of Contents for VRX633R

Reviews:

Related manuals for VRX633R

Brands by name

Popular brands