English
Owner’
s manual
English
Owner’
s manual
sET
BAss
TREBLE
+3
F = 50Hz, G=+ 10dB, Q=1
F=12KHz, G= +8dB
+2
F = 50Hz, G=+ 8dB, Q=1
F=12KHz, G= +8dB
+1
F = 50Hz, G=+ 8dB, Q=1
F=12KHz, G= +6dB
0
F = 50Hz, G=+ 6dB, Q=1
F=12KHz, G= +6dB
-1
F = 50Hz, G=+ 6dB, Q=1
F=12KHz, G= +4dB
-2
F = 50Hz, G=+ 4dB, Q=1
F=12KHz, G= +4dB
-3
F = 50Hz, G=+ 4dB, Q=1
F=12KHz, G= +2dB
CUsTOM
- Choose the "CUSTOM" item and select the "CUSTOM DETAIL" item. "BASS" controls
low sound and "TREBLE" controls high sound.
EXCITE
- Seeing the following table, set the value to weaken intermediate sound and emphasize
both low sound an d high sound.
2. BAL/FAD
To control the location adjustment of the sound, choose the "BAL/FAD" item and press the [ENT]
button. Use the [
▲
][
▼
][
|
◀◀
]
[
▶▶
|
] button to adjust the balance/fader level.
FADER
■
To emphasize the sound from the front speaker or rear speaker.
■
This function has a range from 0 to 12.
BALANCE
■
To emphasize the sound from the right speaker or left speaker
■
This function has a range from 0 to 13.
3. OThERs
To adjust other functions, choose the "OTHERS" item and press the [ENT] button.
sUB WOOFER VOL
■
To control the volume level of the subwoofer
M-B EX
■
To boost low sounds of below 50Hz
hPF
■
To control the output of POWER-AMP
LPF
■
To control the output of SUB-WOOFER
AMP CANCEL
■
To control the using presence of built-in AMP
■
Select the ON or OFF value to enable/disable the internal amplifier. If you use the external
AMP, it is recommended that the built-in AMP be turned off.
Z-ENHANCER
BASS BOOST
IMPACT
EXCITE
CUSTOM
SUB WOOFER VOL
M-B EX
HIGH PASS FILTER
LOW PASS FILTER
AMP CANCEL
sOUND
BAL/FAD
Z-ENHANCER
OTHERS
BASS GAIN
BASS FREQ
BASS Q
TREBLE GAIN
TREBLE FREQ
Press the [
♪
] button to enter into SOUND mode. Press the [ENT] button to adjust detail items.
To adjust the "BASS BOOST", "IMPACT", "EXCITE", "CUSTOM" item, set the Z-ENHANCER to
"ON". Use the [
|
◀◀
] or [
▶▶
|
] button to adjust the level.
BAss BOOsT -
Seeing the following table, set the value to emphasize low sound.
1. Z-ENhANCER
sET
BAss
TREBLE
+3
F = 80Hz, G=+12dB, Q=1
F=12KHz, G= 4dB
+2
F = 80Hz, G=+10dB, Q=1
F=12KHz, G= 4dB
+1
F = 80Hz, G=+ 8dB, Q=1
F=12KHz, G= 4dB
0
F = 80Hz, G=+ 6dB, Q=1
F=12KHz, G= 4dB
-1
F = 80Hz, G=+ 4dB, Q=1
F=12KHz, G= 4dB
-2
F = 80Hz, G=+ 2dB, Q=1
F=12KHz, G= 4dB
-3
F = 80Hz, G=+ 0dB, Q=1
F=12KHz, G= 4dB
IMPACT
- Seeing the following table, set the value to emphasize both low sound and high sound.
sET
BAss
TREBLE
+3
F = 80Hz, G=+10dB, Q=1
F=8KHz, G= +6dB
+2
F = 80Hz, G=+ 8dB, Q=1
F=8KHz, G= +6dB
+1
F = 80Hz, G=+ 8dB, Q=1
F=8KHz, G= +4dB
0
F = 80Hz, G=+ 6dB, Q=1
F=8KHz, G= +4dB
-1
F = 80Hz, G=+ 6dB, Q=1
F=8KHz, G= +2dB
-2
F = 80Hz, G=+ 4dB, Q=1
F=8KHz, G= +2dB
-3
F = 80Hz, G=+ 4dB, Q=1
F=8KHz, G= 0dB
AUDIO Operations
