Clarion VMA543, Owner'S Manual

Page: 14 / 24

14
VMA5
43
and VMA7
43
•
Always use great care when attaching anything to a vehicle!
Visually inspect all sides of any potential screw location to
ensure no damage will occur.
WARNING!
NEVER install this monitor where it is
visible from the driver’s seat, or where
it could injure any vehicle occupant in
case of an accident. Ensure that your
installation does not create risk of
head-strike injury, and that the monitor
will remain securely mounted in the
case of an accident or sudden maneu-
ver.
Flush mounting in the headrest
You may use the included trim bezel to flush-mount the
monitor.
1. Ensure that you will have sufficient clearance for the
monitor and its rear-located wiring harness.
2. Cut the opening.
3. Route the DIN-connector end of the wiring harness into the
opening from the rear out the front.