Clarion UNGO MS3001 Owner'S Manual Download Page 18

MS3001 / MS3200 Owner’s Manual  -  Page  15

1.  Ungo Security Corporation of Gardena, California ("Ungo
Security") warrants this Ungo system to be free from defects
in materials and workmanship and to comply with Ungo
Security’s applicable printed specifications.

2.  Ungo Security systems carry a limited lifetime warranty on
the Main unit (system brain) and transmitters.  The warranty
is limited to Ungo Security systems that have been installed
by an approved Ungo dealer and is extended to the Original
Purchaser ("Owner") and to the original vehicle in which it
was installed only, and is not transferable to any subsequent
owner or owners of the product(s).
All other products (including those products of other
manufacturers which are supplied by Ungo security as a part
of, or an accessory to, an Ungo Security-manufactured
product) are warranted by Ungo security for a period of one
year from the date of sale to the Owner.  For specific
identification of such products contact Ungo Security.

3.  This warranty shall not cover: (I) any damage caused by
Owner’s negligence or misuse of any kind, or any damage
due to causes unrelated to Ungo Security’s manufacturing,
including, but not limited to improper servicing or repair by
someone other than Ungo security or an authorized service
facility:  (II) alterations or modifications to the Ungo System
other than the addition of an authorized accessory:  or (III)
improper installation or removal from the vehicle contrary to
Ungo Security’s instructions.

4.  Obligations of Ungo Security.  In the event the Owner’s
Ungo System does not comply with this warranty, it must be
returned to Ungo security as specified below. Ungo security
will repair or replace it with a new or reworked unit, within
thirty (30) days of receipt and acceptance of such defective
unit, and without cost to Owner.

5.  To make a claim under the warranty.  Owner must:  (I)
provide Ungo security with written notice that the Ungo
System does not comply with the warranty within thirty (30)
days from the date of the Owner’s discovery of the defect
and (II) furnish proof of purchase and purchase date (this
requirement is satisfied if Ungo security has a completed
warranty registration card on file).

6.  Owner obligations.  To obtain Warranty Service, Owner
must at Owner’s expense: (I) have the Ungo System
removed from the vehicle by an authorized Ungo Security
dealer, (II) package the unit in a reasonable manner to
prevent damage to the unit during shipment; and (III) ship the
unit, freight prepaid, to Ungo Security’s factory or other
authorized repair facility.

7.  Repair facility locations.  To obtain the name, address and
phone number of the nearest Authorized Ungo Repair
Facility, Owners may contact Ungo security at 310-327-
9100.

8.  The Owners of Ungo Systems in California have the right
to have the product serviced or repaired during the warranty
period.  The warranty period will be extended for the number

of full days that the product has been out of the Owner’s
hands for warranty repairs.  If a defect exists within the
warranty period, the warranty will not expire until the defect
has been fixed.  The warranty period will also be extended if
the repair has not been performed due to delays caused by
circumstances beyond the control of the Owner, or if the
warranty repairs did not remedy the defect and the Owner
notifies Ungo Security or the seller of the failure of the repairs
within sixty (60) days after they were completed. If, after a
reasonable number of attempts, the defect has not been
fixed the Owner may return this product for replacement or a
refund, subject in either case, to a deduction of a reasonable
charge for usage.  The time extension does not effect the
protection or remedies the Owner has under other laws. 

9.  Exclusions from liability.

(A)  In no event shall Ungo security be liable for any loss or
damages beyond the original purchase price of the Ungo
system, and Ungo security specifically excludes any and all
incidental and consequential damages, whether resulting
from breach of warranty or contract,  negligence or other
conduct in connection with any sale, use, servicing or repair
of a unit.  (Some states do not allow the exclusion of
incidental or consequential damages, so the above
exclusion may not apply to you.)

(B)  There are no warranties, express, statutory or implied,
which extend beyond that which is described herein, and in
particular, all implied warranties of merchantability and
fitness for a particular purpose, and all warranties of title and
against encumbrances, are expressly disclaimed, limited
and excluded as permitted by law; but in no event shall any
implied warranty, whether of merchantability of fitness for a
particular purpose or otherwise, have a duration exceeding
that of the express warranty made herein. (Some states do
not allow limitation on how long an implied warranty lasts, so
the above limitation may not apply to you.)

(C)  No agent, officer, employee or representative of Ungo
Security, or any other person, has authority to make any
representations, promises or warranties respecting Ungo
Systems and their authorized accessories. 

(D)  Owner has the right to bring any action at law or in equity
to resolve disputes concerning, or to enforce, the provisions
of this warranty.  No action at law or in equity may be brought
against Ungo security for breach of warranty or contract or
based on negligence of other conduct more than three (3)
years from the date the cause of action has occurred.

(E)  This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.

(F) The remedies extended herein are the sole and
exclusive remedies available to Owners of Ungo systems.

(G)  Under no circumstances should this warranty, or the
products covered by it, be construed as an insurance policy
against loss.

Warranty Information

MS3001_owner's.qxd  9/10/99  5:27 PM  Page 15

Summary of Contents for UNGO MS3001




















Reviews: