Clarion TB741P, Owner'S Manual & Installation Manual

Page: 16 / 30

English
Owner
’s manual
16
TB741P/TB742P/TB743W
ADJ 2
VTR N/P
[ TV AREA ]
[ AUDIO OUT ]
NTSC AUTO PAL
TV1 TV2 VTR1 VTR2
TV Mode Operations
[ TV AREA ]
[ VTR N/P ]
AUDIO OUT HI
LOW
ADJ 2
Selecting VTR system (NTSC/PAL/
AUTO)
1. Display the adjustment menu as described
in the section, “ Selecting the adjustment
menu ”.
2. Press the [
a
] or [
d
] button to select
NTSC, PAL or AUTO.
∗
When [ AUTO ] is selected, automatic
switching between NTSC and PAL may not
occur properly. In such cases, use manual
selection.
∗
Press the [ ADJ ] button to return to the normal
screen mode.
∗
The factory default setting is “ AUTO ”.
Setting the audio output sound
level
You can adjust an output sound level of audio
output terminal (RCA L/R).
1. Display the adjustment menu as described
in the section, “ Selectiong the adjustment
menu ”.
2. Press the [
a
] or [
d
] button to select a
desired mode and set it.
3. Press the [ ADJ ] button to return to the
normal screen mode.
∗
The factory default setting is “ HI ”.
Changing the TV reception area
(TB741P only)
∗
The factory default setting is “ OTHERS ”.
1. Display the adjustment menu as described
in the section, “ Selecting the adjustment
menu ”.
TV AREA
■
OTHERS
■
[ NEW ZELAND ]
[ AUSTRALIA ]
RTN
2. Press the [
d
] button to display a TV area
selecting screen.
3. Press the [
w
] or [
z
] button to select a
desired mode and set it.
∗
Press the [ BND ] button when all adjustments
have been made to return to the adjustment
menu screen.
Press the [ ADJ ] button to return to the normal
screen mode.
∗
Any station preset memories are lost when
the reception area is changed.
Watching a external device
Refer to the Instruction Manual of the unit
concerned for details on operating the external
device connected.
Press the [ BND ] button to select VTR (External
Device).
Each time the [
BND ] button is pressed, the
setting is switched in the sequence shown
below.