REMOTE CONTROL UNIT
REAR PANEL
Main unit installation method
Input-A (speaker input) wiring method
Input-B (RCA input) wiring method
■
INPUT-A
Speaker input terminal
INPUT-B
RCA input terminal
* Connect the monaural signal input to the L channel
terminal.
POWER
Power supply input terminal
REMOTE CONTROL
Remote control input terminal
* If the woofer level can be controlled from the center unit, the unit can
be used without connecting the remote control unit. (However, gain
and cut-off frequency will be fi xed at 120Hz, and phase at normal)
■
GAIN
Gain control knob
FREQ
Cut-off frequency adjustment knob
Adjust the cut-off frequency to 50-120Hz. The knob has
a 75Hz and 100Hz click position.
POWER INDICATOR
Power indicator
PHASE
Phase switch
Use switch to select the phase
according to the system.
1.
Attach the mounting bracket
5
to the bottom surface
of the main unit using the
screws
6
.
2.
Cut slits in the carpet and
insert the speed nuts
8
.
3.
Fix the mounting bracket to
the carpet using the tapping
screws
7
.
* Attach the other side in the
same way.
* If there is not enough space
to install the unit using the
mounting bracket, attach the
hook-and-loop fastener - large
0
to the mounting surface
of the main unit and fi x to the
carpet.
1.
Attach the hook-and-loop
fastener - small (female)
9
to the vehicle.
2.
Attach the hook-and-loop
fastener - small (male)
9
to the bottom surface of
the remote control unit and
fasten the remote control unit
to the vehicle.
* Clean the surface of any dirt
before attaching the fastener.
* Use the remote control unit
extension cord
3
as required.
■
■
How to attach remote control unit /
■
Center unit
Main power supply (yellow)
Ground (black) Connect to metal portion of vehicle chassis
4
Remote control unit
1
Power supply cord
(Connect to power supply input terminal)
Right speaker
Left speaker
Speaker rear panel
Gray/Black
White
White/Black
Gray
Amplifi er control (blue/white)
2
Speaker input cord
(Connect to speaker input terminal)
Fuse (10A)
■
Center unit
Main power supply (yellow)
Ground (black) Connect to metal portion of vehicle chassis
4
Remote control unit
1
Power supply cord
(Connect to power supply input terminal)
Speaker rear panel
Amplifi er control (blue/white)
Fuse (10A)
RCA pin cord (sold separately)
White
Red
Connect to RCA input terminal
9
Hook-and-loop fastener - small (female)
4
Remote control unit
9
Hook-and-loop fastener - small (male)
7
Tapping screw
8
Speed nut
6
Screw
5
Mounting bracket
NAMES AND FUNCTIONS OF PARTS
HOW TO INSTALL
CONNECTION EXAMPLE