14
DXZ725
English
Setting the Beat EQ
This unit are provided with 5 types of sound tone ef-
fects stored in memory. Select the one you prefer.
∗
The factory default setting is “USER CUSTOM”.
Each time you press the [BEQ] button, the tone
effect changes in the following order:
“BASS BOOST”
➜
“IMPACT”
➜
“EXCITE”
➜
“USER CUSTOM”
➜
“TONE BYPASS”
➜
“BASS BOOST” ...
• BASS BOOST
: bass emphasized
• IMPACT
: bass and treble empha-
sized
• EXCITE
: bass and treble empha-
sized mid de-emphasized
• USER CUSTOM : user custom
• TONE BYPASS
: no sound effect
Adjusting the tone
Press the [A] button and select the item to ad-
just. Each time you press the [A] button, the
item changes in the following order:
●
When “BASS BOOST” is set
“NON-FAD VOL”
➜
“BASS BOOST”
➜
“BALANCE”
➜
“FADER”
➜
Last function
mode.
●
When “IMPACT” is set
“NON-FAD VOL”
➜
“IMPACT”
➜
“BAL-
ANCE”
➜
“FADER”
➜
Last function mode.
●
When “EXCITE” is set
“NON-FAD VOL”
➜
“EXCITE”
➜
“BAL-
ANCE”
➜
“FADER”
➜
Last function mode.
●
When “USER CUSTOM” is set
“NON-FAD VOL”
➜
“BASS <GAIN>”
➜
“MID
<GAIN>”
➜
“TREB<GAIN>”
➜
“BALANCE”
➜
“FADER”
➜
Last function mode.
●
When “TONE BYPASS” is set
“NON-FAD VOL”
➜
“BALANCE”
➜
“FADER”
➜
Last function mode.
∗
Pressing the [BEQ] button for 1 second or longer
while in “USER CUSTOM” sets flat, and displays
a “BEQ FLAT” message.
Note:
• When the separately-sold digital sound processor
(DPH910) is used, the bass and treble tone ad-
justments cannot be made. To adjust the tone, re-
fer to the section “DSP Operations”.
Adjusting the non fader output
volume
You can adjust the volume output from the unit’s
non fader output terminal.
1. Press the [A] button and select “NON-FAD
VOL”.
2. Turning the [ROTARY] knob clockwise in-
creases the output volume; turning it counter-
clockwise decreases the output volume.
∗
The factory default setting is “0”. (Setting
range: –6 to 6)
3. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.
Adjusting the bass
The bass gain, bass F (center frequency) and
bass Q can be adjusted as follows.
1. Press the [A] button and select “BASS
<GAIN>”.
2. Press the [
a
] or [
d
] button and select from
“BASS <GAIN>”
➜
“BASS <F 50>”
➜
“BASS <Q 1>”
➜
“BASS <GAIN>”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and adjust the gain,
the F (center frequency) and the Q.
BASS GAIN : –6 to 8 (The factory default
setting is “0”)
BASS F :
50Hz/80Hz/120Hz (The fac-
tory default setting is “50”)
BASS Q :
1/1.25/1.5/2 (The factory de-
fault setting is “1”)
4. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.
Adjusting the MID
The MID gain, MID F (center frequency) and
MID Q can be adjusted as follows.
1. Press the [A] button and select “MID
<GAIN>“.
2. Press the [
a
] or [
d
] button and select from
“MID <GAIN>”
➜
“MID <F 1k>”
➜
“MID <Q
2>”
➜
“MID <GAIN>”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and adjust the gain,
the F (center frequency) and the Q.
MID GAIN :
–6 to 6 (The factory default
setting is “0”)
Basic Operations
