32
VRX630
English
Owner
’s manual
Clock Adjustment
1. Press the ADJ button
*
to display the ad-
justment selection display.
2. Move the JOYSTICK
¡
up or down to select
CLOCK, then press ENT at the center of the
JOYSTICK
¡
to display the clock adjust-
ment display.
3. Move the JOYSTICK
¡
left or right to select
HR or MIN, then move the JOYSTICK
¡
up
or down to adjust the time.
∗
The time is displayed in 12-hour format.
4. Pressing ENT at the center of the JOYSTICK
¡ when the cursor is above HR or MIN saves
the adjusted value in memory and simulta-
neously returns the display to the previous
display (adjustment selection display).
To cancel clock adjustment before comple-
tion, use the JOYSTICK
¡
to move the cur-
sor to MENU, then press ENT at the center
of the JOYSTICK
¡
.
Triggered audio mute for cellular
telepones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular tele-
phone rings in the car.
∗
This function is not compatible wiht all cellular
telepones Contact your local authorized
Clarion dealer for information on proper instal-
lation and compatibility.
Other Functions
DSP operations
DSP control function
If the DSP (DPH910), sold separately, is con-
nected to this unit using the CeNET cable, all
the functions of the DSP can be controlled.
∗
When the DSP is connected, an external amplifier
is required.
∗
DSP control can all be operated only when the
panel is open.
DSP functions
There are 2 modes available in DPH910, stan-
dard mode and professional mode. Choose one
of them and adjust the sound field and the
sound quality.
●
Functions common to each mode:
Such as auto loudness, subwoofer etc.
●
Standard mode:
Adjustment using the graphic equalizer function
and the DSP function.
●
Professional mode:
Adjustment using the space equalizer function
and the parametric equalizer function.
∗
When the standard mode is selected, adjustment
for the professional mode cannot be made. On
the contrary, when the professional mode is se-
lected, adjustment for the standard mode cannot
be made.
∗
For details on functions of each mode, refer to the
owner’s manual supplied with the DPH910.
∗
Hereafter the graphic equalizer is referred to as a
G.EQ, the space equalizer referred to as VSE and
the parametric equalizer referred to as P.EQ.
Operations common to each
mode
Output adjustment of auto loud-
ness, subwoofer and playback
band
1. Press the ADJ button
*
to switch to the ad-
justment selection display.
2. Operate the JOYSTICK
¡
upward or down-
ward to select “SOUND” and press the ENT
at the center of the JOYSTICK
¡
to change
into the Sound adjustment display. In the
Sound adjustment display “A.LD LEVEL”,
“W.OUT”, “W.LPF”, “HPF”, “T.TONE” are
listed.
Operate the JOYSTICK
¡
rightward or leftward
to select an item to be adjusted.
3. To make an adjustment on:
