OHM653 9
2.
Determine if the mounting bracket can be attached to the
roof beam through the dome light opening in the head-
liner. This depends on the amount of space between the
headliner and the roof beam.
Exploded view - mounting through dome light opening
Roof
Roof Beam
Screws
Overhead Monitor
Screws
Headliner
Mounting
Bracket
Front of vehicle
Opening in headliner for dome light
Note
:
•
If there is too much space between the roof beam and the
headliner, the headliner could crush and wrinkle when the
monitor and bracket are assembled. Verify all clearances to
prevent damage to the vehicle or the interior trim!
3.
A mounting spacer may be used to strengthen the
installation and to take up any gap between the headliner
and the roof beam. Screw the spacer to the roof beam,
and screw the bracket to the spacer.
Exploded view - mounting using a spacer:
Roof
Optional Spacer Material
(Installer Provided)
Screws
Roof Beam
Screws
Overhead Monitor
Screws
Headliner
Mounting
Bracket
Front of vehicle
Opening in headliner for dome light
OHM 653 122302.p65
12/23/02, 10:42 PM
9
