English
7
NX502A
Start using Clarion Mobile Map
Map Screen
12. To enlarge this small map and open the
Map screen, tap [Show Map] button
13. Zooming in and out
14. Tilting up and down
15. Rotating left and right
16. 2D or 3D view
17. Compass in 2D map view mode
18. Compass in 3D map view mode
19. Location information
20. Return to normal navigation
21. Select destination
Quick Menu
22. The Quick menu is a selection of controls
and functions that are frequently needed
during navigation. It can be opened
directly from the Map screen by tapping
.
23. Find / Find Places /Quick Search (This
function lets you search for a Place
along your route or around your current
location if there is no route calculated)
24. Find / Favourite (This button opens the
list of your Favourite destinations)
25. Find / History (This button opens the
History list. You can select one of your
previous destinations)
26. My Route / Edit Route (This button
opens the route editing function)
27. More / Settings / Route Settings (This
button opens the route related settings)
28. More / Settings / Map Settings (This
button opens the map related settings)
29. Tap the Current Street field on the Map
screen (This button opens a special
screen with information about the
current position and a button to search
for nearby emergency or roadside
assistance.
30. My Route / Cancel Route (This button
cancels the route and stops navigation.
The button is replaced with the next one
if waypoints are given)
Installation Guide
Before Starting
Cautions On Installation
1. Prepare all articles necessary for installing
the main unit before starting.
2. Install the unit within 30° of the horizontal
plane.
3. If you have to do any modification on the
car body, such as drilling holes, consult
your car dealer beforehand.
4. Use the included screws for installation.
Using other screws can cause damage.
5. This unit has a fan motor in the back
of the main unit so as not to raise the
temperature in the source unit. When
the fan motor vent is covered with cords
or mounting bracket, it may cause a
malfunction. Be sure not to cover it when
wiring cords.
Car battery
1. This set is exclusively for use in cars with a
negative ground, 12 V power supply.
2. Read these instructions carefully.
3. Be sure to disconnect the battery “ ” terminal
before starting. This is to prevent short circuits
during installation.
Max. 30°
Chassis
Damage
Max. 6 mm (M5 screw)
Fan motor vent
Package Contents
Source unit ................................................1
Wiring harness...........................................1
GPS antenna .............................................1
CLAMP for GPS antenna’s cable ..............3
DOUBLE FACE TAPE for GPS Antenna...1
Remote control unit ...................................1
Battery (CR2025).......................................1
(Installed in remote control)
2Din Trim ring (wide) .................................1
2Din Trim ring (narrow) ..............................1
Cleaning cloth ............................................1
Warranty Card ...........................................1
Quick Start Guide ......................................1
Owner’s manual (CD-R) ............................1
Electro tap .................................................2
Flush mount bolts(M5x6) ...........................8
Hexagon Head Screw(M5x6) ....................8
AV cable ....................................................1
Line out cable ............................................1
Rear Zone out cable ..................................1
SWC cable.................................................1
External Microphone cable ........................1
Camera Visual IN AUX2 cable ..................1
USB cable..................................................1
