Clarion NX405E Owner'S Manual Download Page 25

Page: 25 / 153

NX405E

English

Owner’

s Manual

English

•

In case of a track recorded at VBR (variable bit rate),

the display for the play time of the track may be

slightly different from the actual play time. Also, the

recommended value of VBR ranges from 32kbps to

320kbps.

•

After disc selection, the play mode is automatically

engaged.

Playback MP3/WMA/AAC menu

1. Repeat Playback

While playing MP3/WMA/AAC touch

[ ]

button can

switch between Repeat Folder, Repeat All and Repeat

Track, Repeat Folder and Repeat All.

2. Current Folder

•

Showing title of current folder.

•

The number on the folder symbol is the number of

files and folders number in current folder.

•

Touch the title of current folder, playlist will show files

and folders in upper folder.

* Other operations about playing MP3/WMA/AAC are

almost same as CD Player mode.

Stop Playback

Touch

[ ]

button to stop playback.

Touch

[ ]

button again to resume playback.

Playback resumes from start of the folder which playing

track is in.

•

Other operations about playing MP3/WMA/AAC are

almost same as CD Player mode.

Summary of Contents for NX405E

























































































































































Search results

Summary of Contents for NX405E

Reviews:

Related manuals for NX405E

Brands by name

Popular brands

Clarion NX405E, Owner'S Manual

Search results

Summary of Contents for NX405E

Reviews:

Related manuals for NX405E

Brands by name

Popular brands