You can set the following parameters:
Button
Function
Rename the profile for something meaningful, for example John's car.
Set the maximum speed you travel at.
Enter the average consumption of your vehicle in built-up areas. The
unit for consumption can be set in Regional Settings.
Enter the average consumption of your vehicle on highways. The unit
for consumption can be set in Regional Settings.
Select the engine and fuel type of your vehicle. It helps estimate the
CO
2
emission.
To reset all vehicle profiles to their default settings, tap
,
, and
.
4.3.1.2 Route Planning Method types
You can select from the following route planning method types:
Button
Description
Gives a quick route if you can travel at or near the speed limit on all
roads. Usually, the best selection for fast and normal cars.
Results in a route with fewer turns and no difficult manoeuvres. With
this option, you can make NX405E take, for example, the motorway
instead of a series of smaller roads or streets.
Gives a short route to minimise the travel distance. It can be optimal for
slow vehicles. Searching for a short route regardless of the speed, this
route type is rarely optimal for normal vehicles.
Gives a quick but fuel-efficient route based on the fuel consumption
data. Travel cost and CO
2
emission calculations are estimations only.
They cannot take elevations, curves and traffic conditions into
consideration.
72 NX405E English
