manualshive.com logo in svg

Clarion NX405, Owner'S Manual, Page: 55 / 162

Share
Download
Clarion NX405 Owner'S Manual Download Page 55

54

NX405

English

English

Owner’

s Manual

English

Owner’

s Manual

DVD Wide Screen Mode: 

Set the DVD wide screen 

mode On or Off.

Dimmer: 

Set Dimmer value from 0 to 20.

Dimmer Mode: 

There are three options, Day, Night 

and Auto.

Audio Setup Menu

Balance:

 Choose the desired volume for left and right 

speaker.

Fader: 

Choose the desired volume for front and rear 

speaker.

Beat EQ:

 Choose the desired mode: Bass Boost, 

Impact, Excite, Custom and OFF. 

Subwoofer Ctrl:

 Choose the desired subwoofer gain 

from 0 to 14.

Subwoofer Phase: 

Choose the  Subwoofer Phase 

normal or reverse.

High Pass Filter: 

Choose the frequency about the 

high pass filter or enable. The frequencies include 
60Hz, 90Hz and 120Hz.

Low Pass Filter:

 Choose the frequency about the low 

pass filter or enable. The frequencies include 60Hz, 
90Hz and 120Hz.

Magna Bass EX:

 Choose the loudness On or Off.

Note:

 Optional cable (sold separately) is necessary when you 
use Audio line out.

Navigation Setup Menu

 

GPS Time:

 Set the system time to be synchronized 

with GPS local time or not.

Navi Interrupt:

 There are three choices: On/Popup/

Off. “On”: The navigation screen will cover to AV 
screen when reaching some key point. “Popup”: When 
small turn info window will pop up in the top of the 
AV screen to indicate the key point. “Off”: Turn off this 
function.

Voice Guidance:

 There are three choose: On/Mute/ 

Off. 
On: Interrupt function of voice guidance is on. While 
interrupting no attenuate function of AV sound.
Mute: Interrupt function of voice guidance is on. While 
interrupting attenuate function sound is on.
Off: Disable the navigation voice guidance. 

Others Setup Menu

.

Set Password:

 Set the password for DVD parental 

control.

Parental Control:

 Set the rating of the age. It contains 

Kid Safe/G/PG/PG- 13/PG-R/R/NC- 17/Adult.

Summary of Contents for NX405



































































































































































Reviews:

No comments