12
HX-D2
English
Adjusting the bass/treble
This function is used to set the tone in more
detail for listening.
• The tone can be adjusted when the Equalizer
mode is set to "
BASS/TREB
".
∗
This can be adjusted when the Audio mode is the
Standard mode or the Multi mode.
∗
The factory default setting is "
0 dB
".
1. Press the [
A-M
] button to select "
BASS
" or
"
TREB
".
2. Press the [ ] or [ ] button to adjust the
output volume.
∗
The adjustment range is -12 dB to +12 dB
3. Press the [
A-M
] button several times to
return to the previous mode.
Adjusting the balance/fader
• "
FADER
" (fader) can be adjusted when the
Audio mode is the Standard mode or the
Direct mode.
∗
The factory default setting is "
0
".
1. Press the [
A-M
] button to select "
BAL
" or
"
FADER
".
2. Press the [ ] or [ ] button to adjust the
volume.
●
Adjusting the balance (volume of the left
and right speakers)
To enhance the left side, press the [ ] button.
To enhance the right side, press the [ ]
button.
∗
The adjustment range is L13 to R13.
●
Adjusting the fader (volume of the front
and rear speakers)
To enhance the rear side, press the [ ] button.
To enhance the front side, press the [ ]
button.
∗
The adjustment range is R12 to F12.
3. Press the [
A-M
] button several times to
return to the previous mode.
Turning on/off the display
You can turn the display ON/OFF by holding the
[
A-M
] button down for at least one second.
You can also turn the display ON by pressing the
[
DISP
] button while the display is OFF.
Adjusting the tone
Press the [
A-M
] button and select the item to
adjust. Each time you press the [
A-M
] button,
the item changes in the following order:
∗
"
BASS
" and "
TREB
" are displayed when "
BASS/
TREB
" are selected at
EQ SELECT
.
●
When “STD” is set
“SW-VOL”
∗
1
➜
“BASS”
∗
2
➜
“TREBLE”
∗
2
➜
“BAL”
➜
“FADER”
➜
Last function mode.
●
When “DIRECT” is set
“N-FAD VOL”
➜
“BAL”
➜
“FADER”
➜
Last function mode.
●
When “MULTI” is set
“SW-VOL”
∗
1
➜
“BASS”
∗
2
➜
“TREBLE”
∗
2
➜
“BAL”
➜
Last function mode.
∗
1
The item can be adjusted when the sub-woofer
setting is not set to "
OFF
".
∗
2
The item can be adjusted when "
EQ SELECT
" in
the Adjust mode is set to "
BASS/TREB
".
Adjusting the volume of sub-
woofer/non-fader output
These items can be adjusted when the sub-
woofer/non-fader setting is "
ST
" (stereo) or
"
MONO
" (monaural).
∗
The factory default setting is "
0.0 dB
".
1. Press the [
A-M
] button to select "
SW-VOL
"
or "
N-FAD VOL
".
∗
Select "
SW-VOL
" when the Audio mode is the
Standard mode or the Multi mode, and "
N-
FAD VOL
" when the Audio mode is the Direct
mode.
2. Press the [ ] or [ ] button to set the output
volume.
∗
The adjustment range is -10.0 dB to +10.0 dB
(0.5 dB steps).
3. Press the [
A-M
] button several times to
return to the previous mode.
Basic Operations
