English
5
FZ502E
System Setup
System Setup
2. Press and hold the [CONTROL] knob to
confirm.
DISCON (BT mode)
Disconnect currently connected mobile
phone.
1. Rotate the [CONTROL] knob, mobile
phone displays are currently connected.
2. Press and hold the [CONTROL] knob to
disconnect.
MIC GAIN (BT mode)
Rotate the [CONTROL] knob to choose
Mic
gain: -5,-4,-3,-2,-1,0,1,2,3,4,5.
You can change the gain of MIC when a
telephone partner cannot hear your voice.
MIC SEL (BT mode)
Rotate the [CONTROL] knob to choose
microphone EXTERNAL or INTERNAL.
TONE SEL (BT mode)
You can get mobile phone ring tone from the
speaker.
Rotate the [CONTROL] knob to choose
AUTO or INTERNAL.
•
AUTO
:
Mobile phone ring tone from the speaker.
•
INTERNAL
:
The unit original ring tone from the speaker.
AUTO CON (BT mode): ON/OFF
Rotate the [CONTROL] knob to choose
AUTO CON ON or OFF.
AUTO ANS (BT mode)
To answer incoming calls automatically.
Rotate the [CONTROL] knob to choose
AUTO ANS ON or OFF.
PIN CODE
This CODE is required to pairing for
bluetooth.
Press the [CONTROL] knob, rotate the
[CONTROL] knob to select a digit, press the
[CONTROL] knob (left / right) to move the
cursor.
Press and hold the [CONTROL] knob to
confirm.
The PIN CODE default setting is “ 0000 “.
SCRN SVR: ON/OFF
Rotate the [CONTROL] knob to choose
SCRN SVR (screen saver) ON or OFF.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g.: TRACK-
> F O L D E R - > F I L E - > A L B U M - > T I T L E -
>ARTIST->TRACK->...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other ID3
TAG information by pressing [DISP] button
on the remote control.
DIMMER: ON/OFF
Rotate the [CONTROL] knob to choose
DIMMER ON or OFF.
•
ON
: LCD dimmer is active when small
light of vehicle is turned ON.
•
OFF
: LCD always maximum brightness
regardless of the vehicle small light.
REAR/S-W
Rotate the [CONTROL] knob to choose
REAR or S-WOOFER (SUB-WOOFER).
SW PHASE
Rotate the [CONTROL] knob to choose
S U B - W O O F E R p h a s e R E V E R S E o r
NORMAL.
BEEP
Rotate the [CONTROL] knob to choose
beep sound ON or OFF.
TEL-SW
Rotate the [CONTROL] knob to choose
MUTE, ON or OFF.
•
MUTE
:
The sound from this unit is muted during
telephone calls.
•
OFF
:
This unit continues normal operation even
when the cellular phone is used.
•
ON
:
You can listen to your telephone calls from
the speakers connected to this unit.
SOUND
Press the [CONTROL] knob to choose
SOUND. First press shows current EQ.
Rotate the [CONTROL] knob to choose
BEAT EQ in this order:
OFF -> B-BOOST -> IMPACT -> EXCITE ->
CUSTOM
To change CUSTOM setting, and press
the [CONTROL] knob (center), then press
[CONTROL]
knob (right/left) to select EQ
effects including: BASS-G -> BASS-F ->
BASS-Q -> MID-G -> MID-F -> MID-Q
-> TREBLE-G -> TREBLE-F, rotate the
[CONTROL] knob to select a value.
BASS-G / MID-G / TREBLE-G: (-7)- (+7)
BASS-F: 50 / 100 / 200
BASS-Q : 0.7 / 1.0 / 1.4 / 2.0
Audio Setup
MID-F: 500 / 1 K / 2 K
MID-Q: 0.7 / 1.0 / 1.4 / 2.0
TREBLE-F: 5 K / 10 K / 15 K
TREBLE-Q: 0.7 / 1.0 / 1.4 / 2.0
Then press the [CONTROL] knob (left /
right) to select USER preset including:
B A L A N C E - > F A D E R - > M - B E X
->HPF(high pass filter) -> LPF(low pass
filter) -> S-W VOL (Subwoofer Volume),
rotate the [CONTROL] knob to select a value.
BALANCE:LEFT 1-7->CENTER->RIGHT
1-7
FADER:FRONT 1-7->CENTER->REAR 1-7
M-B EX: ON/OFF
HPF: THROUGH/60/90/120
LPF: THROUGH/60/90/120
SUBW VOL: (-6)-(+6)
*
When listening to your calls on your car
speakers, you can adjust the volume by
turning the [CONTROL] knob.
BLINKING
Rotate the [CONTROL] knob to choose
BLINKING light ON or OFF.
CODE: Setting the anti-theft function
(CATS)
“CATS” is the acronym of “Clarion Anti-Theft
System”. When you set a PIN code (called
as “Personal Code”), a theft is prevented by
disabling the operation of the unit at the theft.
Once you set this code, this function will not
be deactivated unless you delete this code.
Press the [CONTROL] knob, rotate the
[CONTROL] knob to select a digit, press the
[CONTROL] knob (left / right) to move the
cursor. Press and hold the [CONTROL] knob
to confirm.
The procedure to delete this code is same as
the way of setting the code.
Notes:
• Write down your Code in case you forget
it.
• If you have lost your Personal Code,
please contact Clarion customer service.
• The CODE screen will be displayed
when turning the ACC power on after
performing the following operations:
• The car battery was replaced.
• The backup power was cut off.
• The RESET button was pressed.
• When you enter a wrong Personal Code,
the message “LOCK - - - -” is displayed
and the Personal Code entry is prohibited
for a while.
This prohibited time is changed according
to the number of times of wrong code
entry as follows:
• 1 to 6 times: 15 seconds
• 7 times or more: 15 minutes
S-CTRL (iPod mode) : ON/OFF
Rotate the [CONTROL] knob to choose
S-CTRL (Simple control) ON or OFF.
* Refer to P8.
130.com.ua
Autogood products «130»
