iPod/iPhone
Mode
Operation
SOURCE
AS/PS
Connect
Compatible iPod/iPhone
Connect an iPod/iPhone to the USB socket on
front panel. When connecting a device, press
the
[SOURCE]
button to select USB/iPod mode
to start playing. The track information displays
You can connect the following iPod/iPhone:
iPod nano (
6
G)
iPod nano (
7
G)
iPod touch (
4
G)
iPod touch (
5
G)
iPhone
3
GS
iPhone
4
iPhone
4
S
iPhone
5
iPhone
5
C
iPhone
5
S
Minimum iOS
5.0
or
higher
1. Press the
[ ]
button to advance to the
next track/song.
Press the
[ ]
button to go to previous
track/song.
2. Press and hold the
[ ]
button to fast
forward through the track/song.
Press and hold the
[ ]
button to fast
backward through the track/song.
Selecting a Track
Play
/
Pause
Press the
[ ]
button to pause the track/song
that is currently playing.
Press the
[ ]
button to resume playing the
track/song that has been paused.
Note:
Please make sure the iPod/iPhone cable is
connected correctly. And please only use
original iPod/iPhone cable.
During playback, pressing the
[ INFO ]
button
will automatically cycle through the following
information on the file being played on the LCD:
ALBUM -> SONGS -> ARTIST -> CLOCK
Display Function
4X45W
IR
iPod Menu Search
on the screen once
start.
playback
English
FZ105
7
6. TROUBLESHOOTING
Unit cannot
power on.
No/low audio
output.
Poor sound
quality or
distortion.
Unit resets itself
when engine is off.
Incorrect connection between
ACC and Battery.
Speaker power rating does
not match unit.
Wrong connections.
Speaker is shorted.
Check the wiring and correct.
Replace speakers.
Check wiring and correct.
Check wiring and correct.
GENERAL
Unit
fuse
blown.
Improper audio output connection.
Volume set too low.
Speakers damaged.
Heavily biased volume balance.
Speaker wiring is in contact
with metal part of car.
Car battery fuse blown.
Replace with new fuse of correct rating.
Check wiring and correct.
Increase volume level.
Replace with new fuse of correct rating.
Replace speakers.
Adjust the channel balance to center position.
Insulate all speaker wiring connections.
Problem
Cause
Measure
Problem
Cause
Measure
USB device cannot
be inserted.
USB device is not
recognized.
No sound heard with
the display “No File”
shown.
Sound skips or is
noisy.
The USB device is damaged.
No MP3/WMA file is stored in
the USB device.
MP3/WMA files are not
encoded properly.
The USB device has been
inserted with wrong direction.
The USB connector is broken.
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
USB
Disconnect the USB device and reconnect. If
the device is still not recognized, try replacing
with a different USB device.
Store these files properly in the USB device.
Use MP3/WMA files encoded properly.
Connectors are loose.
2. Rotate the
[ VOLUME ]
knob to switch between
categories.
PLAYLISTS, ARTIST, ALBUM, GENRE,
SONGS, COMPOSER, AUDIOBOOK
3. Press
[ /MUTE ]
button to confirm selection.
4.
When display the desired
Playlist Artist
Album or Songs or Genre or Composer or
Audiobook, then p
ress the
[ /MUTE]
button
to confirm.
5. Rotate the
[VOLUME]
knob to choose the
desired song to hear.
6. Press the
[ /MUTE]
button to confirm
selection and then you will hear the chosen song.
or
or
1. Press the
[BAND/SEARCH]
button to select
the iPod menu mode.
Summary of Contents for FZ105
Page 9: ......
