DXZ945MP
DXZ946MP
- 7 -
pin 21: NU
: O : Not in use.
pin 22: NU
: O : Not in use.
pin 23: WRITE ENBL
: O : The write enable signal output.
pin 24: M STRB
: O : Control signal output for Memory IC.
pin 25: NU
: O : Not in use.
pin 26: NU
: O : Not in use.
pin 27: LD CONT
: O : The loading control signal output.
pin 28: NU
: O : Not in use.
pin 29: NU
: O : Not in use.
pin 30: NU
: IN : Not in use.
pin 31: CS
: IN : The chip select command input.
pin 32: NU
: - : Not in use.
pin 33: VDD
: - : Positive supply voltage.
pin 34: VSS
: - : Negative supply voltage.
pin 35: V BUS WUP
: IN : V BUS WUP input.
pin 36: C BUS CE/TRB :I/O: Data bus chip enable signal output to CD
IC. Or mechanism sensor signal input.
pin 37: VSS
: - : Negative supply voltage.
pin 38: C BUS CK/TRA :I/O: Data bus clock pulse output to CD IC. Or
mechanism sensor signal input.
pin 39: NU
: IN : Not in use.
pin 40: VSS
: - : Negative supply voltage.
pin 41: C BCK
: IN : Bit clock pulse input from CD IC.
pin 42: NU
: O : Not in use.
pin 43: C LRCK
: IN : LR clock pulse input from CD IC.
pin 44: NU
: O : Not in use.
pin 45: C SD
: IN : Serial data input from CD IC.
pin 46: NU
: IN : Not in use.
pin 47: MS SI
: IN : Serial data input from Master Computer.
pin 48: C DAC BCK
: O : Bit clock output for the internal DAC of CD
IC.
pin 49: MS SCK
: IN : Serial clock input from Master Computer.
pin 50: VSS
: - : Negative supply voltage.
pin 51: NU
: O : Not in use.
pin 52: VDD
: - : Positive supply voltage.
pin 53: C DAC LRCK
: O : LR clock output for the internal DAC of CD
IC.
pin 54: MS CS
: IN : Chip select input from Master Computer.
pin 55: NU
: O : Not in use.
pin 56: VDD
: - : Positive supply voltage.
pin 57: VSS
: - : Negative supply voltage.
pin 58: C BUS 0
:I/O: Data bus for CD IC.
pin 59: C DAC SD
: O : Serial data output for the internal DAC of
CD IC.
pin 60: MS SO
: O : Serial data output to Master Computer.
pin 61: NU
: O : Not in use.
pin 62: NU
: IN : Not in use.
pin 63: NU
: IN : Not in use.
pin 64: WUP
: IN : V BUS WUP.
pin 65: SBSY
: IN : Sub code block synchronous signal detec-
tion input.
pin 66: C BMOVF
: IN : Buffer memory over flag input from CD IC.
pin 67: SCK
: IN : The clock pulse input.
pin 68: VDD
: - : Positive supply voltage.
pin 69: C BUS 1
:I/O: Data bus for CD IC.
pin 70: VSS
: - : Negative supply voltage.
pin 71: LIMIT
: IN : Inside limit switch signal input for the pick-
up.
pin 72: VSS
: - : Negative supply voltage.
pin 73: C PF/ CHUCK
: IN : C2 correction data input from CD IC. Or
chucking signal input from the mechanism.
pin 74: LD MUTE
: O : Muting signal output to the CD mechanism.
pin 75: VDD
: - : Positive supply voltage.
pin 76: VSS
: - : Negative supply voltage.
pin 77: Clock Mode 1
: IN : Clock mode selection.
pin 78: Clock Mode 2
: IN : Clock mode selection.
pin 79: Clock Mode 3
: IN : Clock mode selection.
pin 80: NU
: IN : Not in use.
pin 81: C BUS 2
:I/O: Data bus for CD IC.
pin 82: NU
: O : Not in use.
pin 83: NU
: IN : Not in use.
pin 84: NU
: O : Not in use.
pin 85: NU
: O : Not in use.
pin 86: NU
: IN : Not in use.
pin 87: NU
: IN : Not in use.
pin 88: NU
: IN : Not in use.
pin 89: NU
: IN : Not in use.
pin 90: VSS
: - : Negative supply voltage.
pin 91: VDD
: - : Positive supply voltage.
pin 92: NU
: IN : Not in use.
pin 93: VSS
: - : Negative supply voltage.
pin 94: CLK OUT
: O : Clock pulse output.
pin 95: C BUS 3
:I/O: Data bus for CD IC.
pin 96: NU
: O : Not in use.
pin 97: SYS CLK
: IN : 16.92MHz
pin 98: RESET
: IN : Reset signal input.
pin 99: Memo Data 0
:I/O: Parallel data input/output for Memory IC.
pin100: Memo Data 1
:I/O: Parallel data input/output for Memory IC.
pin101: Memo Data 2
:I/O: Parallel data input/output for Memory IC.
pin102: Memo Data 3
:I/O: Parallel data input/output for Memory IC.
pin103: Memo Data 4
:I/O: Parallel data input/output for Memory IC.
pin104: Memo Data 5
:I/O: Parallel data input/output for Memory IC.
pin105: Memo Addrss 16: O : Address output to Memory IC.
pin106: VSS
: - : Negative supply voltage.
pin107: Memo Addrss 17: O : Address output to Memory IC.
pin108: Memo Addrss 18: O : Address output to Memory IC.
pin109: Memo Addrss 19: O : Address output to Memory IC.
pin110: Memo Addrss 20: O : Address output to Memory IC.
pin111: VSS
: - : Negative supply voltage.
pin112: VDD
: - : Positive supply voltage.
pin113: Memo Data 6
:I/O: Parallel data input/output for Memory IC.
pin114: Memo Data 7
:I/O: Parallel data input/output for Memory IC.
pin115: Memo Data 8
:I/O: Parallel data input/output for Memory IC.
pin116: Memo Data 9
:I/O: Parallel data input/output for Memory IC.
pin117: Memo Data 10
:I/O: Parallel data input/output for Memory IC.
pin118: Memo Data 11
:I/O: Parallel data input/output for Memory IC.
pin119: Memo Data 12
:I/O: Parallel data input/output for Memory IC.
pin120: CN VCC
: IN : Connect to VCC.
pin121: Memo Data 13
:I/O: Parallel data input/output for Memory IC.
pin122: Memo Data 14
:I/O: Parallel data input/output for Memory IC.
pin123: Memo Data 15
:I/O: Parallel data input/output for Memory IC.
pin124: SRQ
: O : V BUS SRQ output.
pin125: VDD
: - : Positive supply voltage.
pin126: VSS
: - : Negative supply voltage.
pin127: NU
: IN : Not in use.
pin128: VSS
: - : Negative supply voltage.
pin129: NU
: IN : Not in use.
pin130: VDD
: - : Positive supply voltage.
pin131: Memo Addrss 0: O : Address output to Memory IC.
pin132: Memo Addrss 1: O : Address output to Memory IC.
pin133: Memo Addrss 2: O : Address output to Memory IC.
pin134: Memo Addrss 3: O : Address output to Memory IC.
pin135: SYS POWER
: O : System power supply control signal output.
pin136: Memo Addrss 4: O : Address output to Memory IC.
pin137: Memo Addrss 5: O : Address output to Memory IC.
pin138: Memo Addrss 6: O : Address output to Memory IC.
pin139: Memo Addrss 7: O : Address output to Memory IC.
pin140: Memo Addrss 8: O : Address output to Memory IC.
pin141: Memo Addrss 9: O : Address output to Memory IC.
pin142: VDD
: - : Positive supply voltage.
pin143: Memo Addrss 21: O : Control signal output for Memory IC.
pin144: VSS
: - : Negative supply voltage.