-3-
For models 1992 and later
For models up to 1991
Figure 1
3. When the Main unit is also connected to an external amplifier,
connect REMOTE on the external amplifier to remote turn on
lead.
Figure 2
*Never let the terminals make contact with the metal
plate parts of the car.
Yellwo
Yellwo
Red
Yellwo
Red
Yellwo
Yellwo
Red
Red
Remote turn-on
Insulation tape
Insulate the terminal
Blue/White
Blue/White
2. When the car stereo is installed in 1998 and later Volkswagen
models, remove the auto antennal leads (Blue/White). Be
sure to insulate both the ISO connector side terminal and the
main unit side terminal with insulation tape, respectively.
(Figure 2)
TROUBLESHOOTING
Problem
Cause
Measure
The microprocessor has
malfunctioned due to noise, etc.
Turn off the power, then press the
[RELEASE]
the DCP.
DCP.
Press the reset button with a thin
rod.
Nothing happens when buttons
are pressed.
Display is not accurate.
button and remove
Reset button
ERROR DISPLAYS
If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem.
Error Display
Cause
Measure
A DISC is loaded upside-down inside the CD deck and
does not play.
Eject the disc then reload it properly.
ERROR 2
A DISC inside the CD changer is not loaded.
This is a failure of CD changer’s mechanism.
ERROR 3
A DISC inside the CD changer cannot be played due to
scratches, etc.
Replace with a non-scratched, non-warped disc.
ERROR 6
A DISC inside the CD changer cannot be played beca-
use it is loaded upside-down.
Eject the disc then reload it properly.
ERROR 2
An MD inside the MD changer is not loaded.
This is a failure of MD changer’s mechanism.
ERROR 3
An MD inside the MD changer cannot be played due to
scratches, etc.
Replace with a non-scratched, non-warped disc.
ERROR 6
An MD inside the MD changer cannot be played be-
cause it is loaded upside-down.
Eject the disc then reload it properly.
If an error display other than the ones described above appears, press the reset button.
ERROR H
Displayed when the temperature in the MD changer is
too high and playback has been stopped automatically.
Lower the surrounding temperature and wait for
a while to cool off MD changer.
A DISC is caught inside the CD deck and is not ejected.
This is a failure of CD deck's mechanism.
ERROR 2
ERROR 3
A DISC cannot be played due to scratches, etc.
Replace with a non-scratched, non-warped disc.
Displayed when a non-recorded MD is loaded in the
MD changer.
Load a pre-recorded MD in the MD changer.
CD/MP3/
WMA
CD
changer
MD
changer
ERROR 3
A DISC cannot be played due to scratches, etc.
Retry or replace with a non-scratched, non-warped
disc.
ERROR 6
A DISC inside the DVD changer cannot be played be-
cause it is loaded upside-down.
Eject the disc then reload it properly.
ERROR P
Parental level error.
Set the correct Parental level.
ERROR 2
A DISC inside the DVD changer cannot be played.
This is a failure of DVD mechanism.
Region code error.
Eject the disc and replace correct region code
disc.
DVD
changer
ERROR R
Mode
ERROR 6
DXZ 8 3 8 R MP
