14
DXZ748RMP
280-8001-01
English
Listening to the radio
1. Press the [
FNC
] button and select the radio
mode. The frequency or PS and PTY appears
in the display.
∗
PS: Programme service name
∗
PTY: Programme type
2. Press the [
BND
] button and select the radio
band. Each time the button is pressed, the ra-
dio reception band changes in the following
order:
FM1
➜
FM2
➜
FM3
➜
AM (MW/LW)
➜
FM1...
3. Press the [
a
] or [
d
] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receiv-
able broadcast stations; LOCAL SEEK can tune
in to only broadcast stations with a good recep-
tion sensitivity.
1. Press the [
BND
] button and select the de-
sired band (FM or AM (MW, LW)).
2. Tune into a station.
∗
If “
MANU
” is lit in the display, press and hold
the [
BND
] button for 1 second or longer.
“
MANU
” in the display goes off and seek tun-
ing is now available.
∗
If “
TA
” is lit in the display, TP stations are auto-
matically sought.
●
DX SEEK
Press the [
a
] or [
d
] button to automatically
seek a station.
When the [
d
] button is pressed, the station is
sought in the direction of higher frequencies; if
the [
a
] button is pressed, the station is sought
in the direction of lower frequencies.
∗
When seek tuning starts, “
DX SEEK
” appears in
the display.
●
LOCAL SEEK
If you press and hold the [
a
] or [
d
] button for
1 second or longer, local seek tuning is carried
out. Broadcast stations with good reception sen-
sitivity are selected.
∗
When local seeking starts, “
LO SEEK
” appears in
the display.
Basic Operations
Adjusting the fader
1. Press the [
A-M
] button and select “
FADER
”.
2. Turning the [
ROTARY
] knob clockwise
emphasizes the sound from the front
speakers; turning it counterclockwise
emphasizes the sound from the rear
speakers.
∗
The factory default setting is “
0
”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[
A-M
] button several times until the function
mode is reached.
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound ad-
justment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
∗
The factory default setting is off.
1. Press and hold the [
A-M
] button for 1 sec-
ond or longer to turn on the MAGNA BASS
EXTEND effect.
“
M-B EX
” lights in the display.
2. Press and hold the [
A-M
] button for 1 second
or longer to turn off the MAGNA BASS EX-
TEND effect.
“
M-B EX
” goes off from the display.
CT (Clock Time) function
The CT function receives CT data sent from an
RDS station and displays the time. Press the [
D
]
button to switch to the CT display.
∗
If a CT data is not being received, “
CT– –:– –
” ap-
pears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
Radio Operations
+DXZ748RMP-009-ENG
1/14/04, 11:02 AM
14