DXZ738RMP
15
English
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [
BND
] button and select the de-
sired band (FM or AM (MW/LW)).
∗
If “
MANU
” is not lit in the display, press and
hold the [
BND
] button for 1 second or longer.
“
MANU
” is lit in the display and manual tuning
is now available.
2. Tune into a station.
●
Quick tuning:
Press and hold the [
a
] or [
d
] button for 1
second or longer to tune in a station.
●
Step tuning:
Press the [
a
] or [
d
] button to manually
tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding
[
DIRECT
] button recalls the stored radio fre-
quency automatically.
1. Press the [
BND
] button and select the de-
sired band (FM or AM (MW/LW)).
2. Press the corresponding [
DIRECT
] button to
recall the stored station.
∗
Press and hold one of the [
DIRECT
] buttons
for 2 seconds or longer to store that station
into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [
DIRECT
] buttons
for 2 seconds or longer to store the current
station into preset memory.
Radio Operations
Auto store
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequen-
tially. If 6 receivable stations cannot be received,
a previously stored station remains
unoverwritten at the memory position.
1. Press the [
BND
] button and select the de-
sired band (FM or AM (MW/LW)).
2. Press and hold the [
P/A
] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
channels.
∗
If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in pre-
set memory in order. This function is useful
when searching for a desired station in memory.
1. Press the [
P/A
] button.
2. When a desired station is tuned in, press the
[
P/A
] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [
P/A
] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
