280-8002-00
DXZ645MP
13
English
Adjusting the Z-Enhancer Plus
1. Press the [
Z+
] button and select the Z-En-
hancer Plus mode to adjust.
2. Press the [
A-M
] button and turning the
[
ROTARY
] knob clockwise adjusts in the +
direction; turning it counterclockwise adjusts
in the – direction.
●
When “
B-BOOST 0
” selected, you can ad-
just the bass in the range of –3 to 3.
●
When “
IMPACT 0
” selected, you can adjust
the bass and treble in the range of –3 to 3.
●
When “
EXCITE 0
” selected, you can adjust
the bass and treble in the range of –3 to 3.
∗
When Z-Enhancer Plus is selected, press and
hold the [
Z+
] button for 1 second or longer to
change to the “
CUSTOM
” mode.
Bass/treble characteristics become flat and
the indication “
Z+ FLAT
” is shown in the dis-
play.
Adjusting the tone
Press the [
A-M
] button and select the item to
adjust. Each time you press the [
A-M
] button,
the item changes as following order:
●
When “BASS BOOST” is set
“SW-VOL 0”
➜
“B-BOOST 0”
➜
“BAL 0”
➜
“FADER 0”
➜
Last function mode.
●
When “IMPACT” is set
“SW-VOL 0”
➜
“IMPACT 0”
➜
“BAL 0”
➜
“FADER 0”
➜
Last function mode.
●
When “EXCITE” is set
“SW-VOL 0”
➜
“EXCITE 0”
➜
“BAL 0”
➜
“FADER 0”
➜
Last function mode.
●
When “CUSTOM” is set
“SW-VOL 0”
➜
“BASS”
➜
“TREBLE”
➜
“BAL 0”
➜
“FADER 0”
➜
Last function
mode.
●
When “Z+ OFF” is set
“SW-VOL 0”
➜
“BAL 0”
➜
“FADER 0”
➜
Last function mode.
∗
If subwoofer function is set “
ON
”, “
SW-VOL 0
” can
be selected.
Adjusting the subwoofer output
volume
You can adjust the volume output from the unit’s
subwoofer output terminal.
1. Press the [
A-M
] button and select
“
SW-VOL 0
”.
2. Turning the [
ROTARY
] knob clockwise
increases the output volume; turning it
counterclockwise decreases the output
volume.
∗
The factory default setting is “
0
”. (Setting range:
–6 to 6)
3. When the adjustment is complete, press the
[
A-M
] button several times until the function
mode is reached.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to “
CUSTOM
”.
1. Press the [
A-M
] button and select “
BASS
”.
2. Turning the [
ROTARY
] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗
The factory default setting is “
B
Å
Å
Å
Å
Å
GAIN 0
Î
Î
Î
Î
Î
”.
(Adjustment range: –6 to +8)
3. Press the [
a
] or [
d
] button to select
“
B
Å
Å
Å
Å
Å
FREQ 50
Î
Î
Î
Î
Î
”.
Turning the [
ROTARY
] knob clockwise or
counterclockwise to select the frequency.
∗
The factory default setting is “
B
Å
Å
Å
Å
Å
FREQ 50
Î
Î
Î
Î
Î
”.
(Adjustment 50/80/120 Hz)
4. Press the [
a
] or [
d
] button to select “
B
Å
Å
Å
Å
Å
Q 1
Î
Î
Î
Î
Î
”.
Turning the [
ROTARY
] knob clockwise or
counterclockwise to select the Q-curve.
∗
The factory default setting is “
B
Å
Å
Å
Å
Å
Q 1
Î
Î
Î
Î
Î
”.
(Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the
[
A-M
] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to “
CUSTOM
”.
1. Press the [
A-M
] button and select “
TREBLE
”.
2. Turning the [
ROTARY
] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗
The factory default setting is “
T
Å
Å
Å
Å
Å
GAIN 0
Î
Î
Î
Î
Î
”.
(Adjustment range: –6 to +6)
3. Press the [
a
] or [
d
] button to select
“
T
Å
Å
Å
Å
Å
FREQ 12K
Î
Î
Î
Î
Î
”.
Turning the [
ROTARY
] knob clockwise or
counterclockwise to select the frequency.
Basic Operations
+DXZ645MP-009-ENG
11/6/03, 3:59 AM
13
