Clarion DXZ466MP, Owner'S Manual

Page: 22 / 31

22
English
DXZ466MP
• Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from the
unit, this indicator blinks.
∗
The factory default setting is “ OFF ”.
2-1. Select “
BLINK LED
”.
3-1. Turn the [ ROTARY
] knob to select “
ON ” or
“ OFF ”.
• Setting the external amplifier
∗
The factory default setting is “ OFF ”.
2-1. Select “ AMP CANCEL ”.
3-1. Turn the [ ROTARY
] knob to select “
ON ” or
“ OFF ”.
Operations Common to Each Mode
• Triggered audio mute for cellular
telephones
This unit requires special wiring to mute the audio
signal automatically when a cellular telephone
rings in the car.
∗
This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
• Performing a system check
This function allows you to perform a system check
from the adjust mode when required.
2-1. Select “
SYSTEM CHECK ”.
3-1. Press and hold the [ ] button for 1 second
or longer.
“ SYSTEM CHECK ” appears in the display,
then the unit returns to the previous
operation mode.
To change other settings
1. Press the [ ADJ
] button to switch to the
adjustment selection display.
2. Press the [ , ] lever upward or down-
ward to select the “ item name ”.
Each time the [ , ] lever is pressed
up/down, the item display changes in the
following order:
“ BLINK LED ” “ AMP CANCEL ”
“
AUX SENS ” “ SYSTEM CHECK ”
3. Turn the [ ROTARY
] knob to select the “
desired
setting item
”.
∗
After completing settings, press the [ ADJ
] but-
ton to return to the previous mode.
• ON:
Use with connected AMP.
• Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
∗
The factory default setting is “ MID ”.
2-1. Select “ AUX SENS ”.
3-1. Turn the [ ROTARY
] knob to select “
LOW ”,
“ MID ” or “ HIGH ”.
• Adjusting the display scroll speed
This feature allows you to slow down the scroll
speed when the scroll speed is too fast, making it
difficult to view the screen.
∗
The factory default setting is “ SPEED 3 ”
2-1. Select “ SCRL SPEED ”.
3-1.Turn the [
ROTARY ] knob to select the setting.
∗
This setting item can be adjusted within the
range SPEED 1 to SPEED 6.
Adjust this setting item while viewing how the
appearance of the display changes.
• Dimmer control
You can setting the dimmer control “ ON ” or “ OFF ”.
∗
The factory default setting is “ ON ”.
2-1. Select “ DIMMER ”.
3-1. Turn the [ ROTARY
] knob to select “
ON ” or
“ OFF ”.
• Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗
The factory default setting is “ 08 ”.
(Adjustment level: 01 to 16)
2-1. Select “ CONTRAST ”.
3-1. Turn the [ ROTARY
] knob to adjust the
contrast.
Push ENT
• OFF:
Use with inside AMP.
Push ENT