background image

Thank you for purchasing this 

Clarion 

product.

Please read this owner’s manual in its entirety before operating this equipment.

After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).

Check the contents of the enclosed warranty card and keep it carefully with this manual.

This manual includes the operating procedures of the CD changer, DVD changer, DAB and TV
tuner connected via the CeNET cable. The CD changer, DVD changer and TV tuner have their own
manuals, but no explanations for operating them are described.

 

CAUTIONS:

This appliance contains a laser system and 
is classified as a “CLASS 1 LASER 
PRODUCT”. To use this model properly, 
read this Owner’s Manual carefully and keep 
this manual for your future reference. In 
case of any trouble with this player, please 
contact your nearest “AUTHORIZED service 
station”. To prevent direct exposure to the 
laser beam, do not try to open the enclosure.

 

!CAUTION

USE OF CONTROLS OR ADJUSTMENTS OR 
PERFORMANCE OF PROCEDURES OTHER 
THAN THOSE SPECIFIED IN THE OWNER’S 
MANUAL MAY RESULT IN HAZARDOUS 
RADIATION EXPOSURE.

 

ADVARSEL.

Denne mærking er anbragt udvendigt på 
apparatet og indikerer, at apparatet arbejder 
med laserstråler af klasse 1, hvilket betyder, 
at der anvendes laserstråler af svageste 
klasse, og at man ikke på apparatets 
yderside kan blive udsat for utilladelig 
kraftig stråling. 
APPARATET BØR KUN ÅBNES AF 
FAGFOLK MED SÆRLIGT KENDSKAB TIL 
APPARATER MED LASERSTRÅLER! 

Indvendigt i apparatet er anbragt den her 
gengivne advarselsmækning, som advarer 
imod at foretage sådanne indgreb i 
apparatet, at man kan komme til at udsaætte 
sig for laserstråling.

 

OBS! 

 

Apparaten innehåller laserkomponenten 
som avger laserstrålning överstigande 
gränsen för laserklass 1.

 

VAROITUS 

Suojakoteloa si saa avata. Laite sisältää 
laserdiodin, joka lähettää näkymätöntä 
silmille vaarallista lasersäteilyä.

MODEL

2

DXZ448R

280-8007-00

280-8007-00

+DXZ448R-001-Cover

11/12/03, 9:52 PM

2

Summary of Contents for DXZ448R






























Reviews: